Product Description

As anode materials of lithium-ion battery, lithium titanate can form a lithium-ion secondary battery with cathode materials of lithium manganese oxide, lithium cobalt oxide, three elements material or lithium iron phosphate etc. Since the lithium titanate has many advantages of high security, high stability, long life and green environmental protection, it can be widely used in electric vehiclespatrol carEnvironmental sanitation vehicleEmergency fire truckcharging stationstourist coachesyachts wind and solar energy storage power, traffic signals, solar hybrid street lightingUPS power supplyhousehold storagecoal disaster relief emergencyweather radarelectricitysmart grid DC power supplycommunication base stationshospitalsfinance telecommunications backup power systems etc. Also it was used in militaryshippingaerospace and other requirements of high securityhigh stability and long-cycle energy storage. 

Single cell structural features

1. Independent battery has convection heat radiating structure which can effectively avoid overheating interaction; 
2. Independent positioning fulcrum structure of single cells can effectively prevent the battery producing a string in the vibration environment, avoids string friction which will damage battery outer insulation, avoid the cumulative effect of extrusion, eliminating the mutual extrusion cause internal damage to the cell membrane, causing danger. 
3. The internal constant pressure structure can keep the battery stable pressure, the better to avoid bonding at the sealed insulated isolation at the affected by water infiltrating into. 

Single cell technical parameters
Specification TK*****2.4/*8
Normal capacity(0.2C) *5 Ah
()Internal resistance(AC) ≤ 1 MΩ 
Normal voltage 2.4 V
Weight of the cell 0.*5kg± 0.*2
Battery dimensions L× W× H (mm) **5; **0; *2

Standdard discharging method Constant current 7.5A
Battery dimensions L× W× H (mm) **0× **0× *5
Operating temperature **0 _*5
Storage temperature **0 _ *5
1Wh()weight per Wh *4.1g
Energy density *0.6wh/kg **7.7wh/L
  Using and maintenance

1.Before using it, you should read the battery and charger instructions carefully to prevent risk caused

by damaged battery and charger.

   2.When you combine the battery with series or parallels, if there are oxidation layer on the surface, you 

should brush surface to the metal glow with thin steel brush to lower the connective resistance to the 

minimal resistance. 

3.When combining with many batteries, if the voltage between the two electrodes is over *6V, the safe voltage

for human beings, to guarantee the safety, you should not touch the two electrodes with your body.

         4 ,Cells used as E-motor or storage power should be matched with controller or related equipment. Because

  the battery piles are matched with protection board, you can not drive the pure inductance equipment.

5.When charging the battery group, please use the chargers consistent with the type of battery. The output of 

the charger must meet the parameter requirement of the battery packs

6.long time storage 

If the cell is stored for a long time(exceed three months),the cell should be stored in drying and cooling place. The cell should be charged and discharged each six months. The cell`s storage environment should be best at *5℃**5℃ temperature.

7.Appearance

8.others

Any matters that this instruction does not cover should be covered between the customer and GMB.