Product Description

Material...................................... Push bar Steel pressed or stainless steel pressed

                                                      Head Cover Steel pressed or stainless steel pressed

                                                      Spring Stainless steel 
Latch bolt.................................... 5/8 throw, stainless steel. 
Dead latch bolt............................ 9/*6, steel. 
Strike........................................... for 5/8" stop
Projection.................................... **1/2 maximum, **7/8 pressed.  
Reversible................................... Non-handed, reversible for all functions and trims. 
For door...................................... **3/4 thick of wood or metal door. Specify thickness if other than **3/4. 
Door width................................... 3 standard for door width of **8 to **0;4 standard for door width of **8 to **0, 
Stile............................................. **1/4 minimum 
Mounting height......................... ***5/*6 from CL to finished floor recommended. 
Mounting..................................... Furnished standard with sheet metal & machine screws or SNB as option. 
Cylinders..................................... For trim, knob, lever & thumb-piece type Schlage C key way. 
Dogging....................................... 1/4 turn, hex key dogging on non-fire labeled device. 
UL listed...................................... For Panic Hardware and UL. Labeled (3 hours) fire exit hardware. 
ANSI Standard............................ A**6.3 Grade 1 
Operation.................................... Inside by slight pressure on any point of the push bar all time. 
Head cover…………………….....  Big **1/2x**3/4x**1/2(**6mmx*8.3mmx*2mm) & 
Standard Finishes...................... Big **1/2x**3/4x**1/2(**6mmx*8.3mmx*2mm) &

                                                        Small **1/3x**3/4x**1/2(**0mmx*8.2mmx*0mm)
US*6, US*6D, US*2D (or other finishes upon request

Handleset: Passage, Storeroom, Classroom function available

Thumbpiece trim for ***0 exit device, US*6D Finish