Product Description

Directions for Use
Tool: Manual or pneumatic plunger caulking gun
 Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.
 For cartridge
1. Cut nozzle to give the required angle and bead size
2. Pierce the membrane at the top of the cartridge and screw on the nozzle
3. Place the cartridge in an applicator gun and squeeze the trigger with equal strength
 For sausage
4. Clip the end of the sausage and place in barrel gun
5. Screw end cap and nozzle on to barrel gun
6. Using the trigger extrude the sealant with equal strength
 Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately.