Product Description

Features:

1.Models available for most BMWs made between ***1 and ***3
However, from ***1 to ***3 the tool often will not work due to two factors: BMW did not wire the SRS controllers to the main diagnostic lines, and BMW did not cleanly phase out
the older 5WK****5, **7 and **5 controllers (which it is not compatible with.)
Work via K line but NOT CAN BUS protocol.
2.Displays all SRS fault codes, tells you what's wrong.
3.Resets the "SRS" Light.
4.Very, very easy to use.
5.With user manual in the package, tell you how to use this item.

Function:
1.Read Airbag Faults:
The tool automatically starts in the “FA” mode (though it won't read the fault codes until you press the “ENTER” ). When ENTER is pressed the first number shown will be the correct code chart to use.

Note: If it shows "*-". There are on codes to display. Pressing ENTER a 2nd time will display the first fault code (see page 6 of the manual for explanation.) To view the next fault press ENTER again, and so on. At the end of the fault list the display will show “*-”.Press ENTER to return to “FA”. lf you encounter problems see troubleshooting page *5.

2.Clear Airbag light / Faults:
It is important what you know exactly why the airbag light came on before resetting it always read the code and look it up first.

WARNING: Do NOT proceed with reset until taking appropriate action to diagnose, understand and solve the problem with the aribag syatem.

Packing List:
1.Airbag reset tool for BMW
2.Hardcopy user manual