Product Description

- Neutralization of cement toxins and harmful gases
- Air purification, deodorization
- Far-infrared ray emission effect
- Blocking of electromagnetic waves and water veins
- Prevention of mold or harmful bacteria
- Insulation effect
- Negative ion supply effect
- Humidity control and condensation-proofing effects
- Superior adhesion strength

- The surface must be clean and completely dry
- Paint must be thoroughly mixed before application
- Diluent is to be tap water, and an appropriate amount (within *0%) should be diluted depending on the method of application
- Paint evenly using a brush or a roller.(When using a spray gun, make sure to use pump-type) Recommended application: More than once(better effects when applied 2 to 3 times) - Depends on the condition of surface and dilution rate.
- When mixing, it will be conveneint to attach screw on a drill
- Apply final finishing (wall paper or paint) after the walls are completely dry
- Avoid painting when the relative humidity rate is over *0% or when room temperature is below *0C
- The effects of Wall Mate are maximized when the above instructions are closely adhered to