Ecobamboo Flooring and Veneers 1. All Bamboo flooring is **0% bamboo material 2. All Bamboo flooring is unfinished upon manufacture 3. Bamboo flooring is compatible with Industrial finishes 4. Can be fire-treated to meet Class 1 requirements 5. Bamboo flooring is a stock item and always available 6. Custom sizes available 7. Bamboo flooring is made from **0 percent rapidly renewable bamboo, using adhesives that are both strong and emissions free. Bamboo flooring can be cut and sanded using conventional woodworking equipment. It can also be glued or mechanically fastened using the same materials and fasteners commonly used with wood. Bamboo is a low resin, open grained material that takes stains and finishes exceptionally well. 8. Bamboo flooring comes in both an amber and natural light tone and is laminated to produce two different surface grains, edge and flat. The edge grain appears as 1/4" strips and the flat grain appears as 3/4" strips on the surface of the Bamboo flooring. It is then finish-sanded to a smooth **0 grit. Whether you are planning a small remodel or a national retail expansion, we have the bamboo material to do the job. 9. Bamboo veneer is manufactured from blocks laminated with water-proof adhesive and bamboo strips. The blocks are first laminated, then conditioned and soaked for two weeks before being sliced into veneer sheets. Bamboo veneer is more difficult to produce than conventional solid wood veneers, due in part to the number of glue joints that reduce yield. Bamboo veneer is backed with either a paper or fleece material to give the product more stability and strength. Producing un-backed veneers is possible, but very fragile and hard to transport. This can result in a lower yield due to damaged material. *0. Bamboo veneers work well in the manufacturing process, but due to different adhesives and press temperatures at different lamination houses it is best to run a few test samples to be sure everything is working well.