Product Description
Bimetallic screw and barrel/extruder screw barrel
Specification:
Screw diameter:Φ*5mm-Φ**0mm L/D=****6
Length of screw and cylinder:***0mm
According to different material and plastic products to design
different screw structure ,compress rate and L/D!
According to different material and plastic products to design
different Barrel with exhaust system and IKV force load system!
As per customers’ demand,we can supply below:
PVC/PE Film Blowing Screw; Blow Molding Screw; PS/PE/PP/ABS Sheet
Extrusion Screw; PE Aluminum Plate;PPR Pipe Screw;EVA
Extrusion Screw;HDPE High efficiency Screw;PET Straps
Screw;XPS/EPE Foamed Screw;Granulation Screw,Vented single
screw etc!
Bimetallic Screw and Cylinder:
Bimetallic Screw production method:
Plasma Alloy Coating Spraying or Wc/Co Whole spray
welding
Bimetallic Barrel production method:Centrifugal Casting
(Inlay Alloy)
The PTA powder plasma welding applies the positive and negative
electrodes of arc welding, allowing the welding path to be
completely,welded with the base material.The minimum possibility of
the welding path becoming less rigid fully prevents the welding
layer from peeling
off – thereby effectively upgrading the life time of the
screws.
Outstanding Features
of Bimetallic Screw and Barrel:
Hardness HRC****5
Outstanding
corrosion-resistance.
Hardness layer reaches 1.5 m/m
thickness.Hardness does not decrease with depth.
Hardness does not decrease under normal
temperature.
Abrsion resistance / wear resistance on the
hardened layer is 2~3 times higher than that treated by
conventional heat treatment.
Detailed Technical
Information:
Base
Material |
1)*8CrMoAlA(JIS SACM**5) 2)Cr*2MOV(JIS
SKD**1)
3)4Cr5MoSiV1(JIS SKD**1) 4)*2CrMo(AISI
***0) |
Bimetallic Alloy
Materials |
1)Fe-based alloy 2)Ni-based alloy/Deloro
alloy
3)Co-based alloy 4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide |
Double-alloy level |
Level A -
containing Tungsten of *0%
Level B -
containing tungsten of *5%
Level C -
containing tungsten of 9.5% |
Surface
Treatment |
Heat Treatment
High Frequency
Treatment
Nitriding treatment(**0
Hours)
Depth of Nitrided Layer: 0.**0.8
mm
Hardness of Nitrided
Layer: *******0Hv (HRC*6°**5°)
Hard Chrome Plating
treatment:
Thickness
of Hard Chrome Plating Layer: 0.***0.*0mm
Hardness
of Hard Chrome Plating Layer: ≥**0HV
Nickel alloy
plating.treatment:
Bimetallic Barrel/Cylinder: Centrifugal Casting
(Inlay Alloy)
Bimetallic Screw: Plasma Alloy Coating
Spraying
Depth of Bimetallic Layer: >2mm
Hardness of Bimetallic Layer: HRC*5°**2° |
Basic
information |
Roughness
of the surface:Ra0.4um
Linearity
of the screw: ≤0.**5mm
Linear
axis limit: ≤0.*2mm
Hardness
after Hardening & Tempering: HB******0
Fragility
of Nitration:≤Two class |
Material
Application |
1)General
Plastics
2)ABS,PA,PC,PE,PET,PP,PS,EVA,PU,PVC,U-PVC,etc
3)PA +
GF(Glass Fiber)
4)Flame-resistant Reinforced
Plastics
5)Modified Engineering
Plastics
6)All
kinds of Mixed Recycled Material(in Scrap or
Granule),etc |
General
Terms |
Means of
transport: Ocean,Air,Express
Production
time: About *5 days after we receive the deposit and
lead time will different according to the order
quantity! |
Our
products advantages |
1)High productivity
2)Wonderful
plasticizing
3)
low energy consumption 4)Wearable and
Durable
5)Fast and On time delivery 6)Best
customer service! |
Our Screw
and Barrel processing
production:
CustomerOrder*-ProductDesign(CustomerDrawing)—ProductionFlowArrangement—Material
Procurement—Hardening&Tempering—Drilling—RoughTurning—RoughThread
Rolling(AlloySprayWelding)—Alignment—FineThreadRolling—Mixing—Alignment—High
FrequencyTreatment—Alignment—Polishing—Grinding—**0HoursNitridingTreatment—Acid
Piclking—Polishing—Chrome
Plating—O.D.Grinding—Packaging&Shipping!
Screw and Barrel Material
picturers:
The foreign material we used as
following:
1. Germanysteel, GH**3 ,***0 ,***2 ,1.***9
,1.**2 ,1.***2 ,1.***3 ,1.***0,1.***2,
2. USA
steel,
P*0,**0,L6,H*3,W**0,D3,A2,D6,O1,S1,M*5,***0,***5,K****0
3. Sweden
steel, **8S,**8H,S**6,S**6H,STAVAX,ASP**3,ASP**0
4.
Australia Steel,
M**2,M**0,W**2,K**0,W**0,K**0,K**0,W**1
5.
Hardnesssteel, YG6X,YG 6A,YG 6,YG8N,YG8,YG8C,YG*1C,YG
*5,YT5,YT*4,YT*0
6. Japan
Steel, SKT 4,YXM 4,YXM *2,SNC **5,SK *3,SKS 3,and
etc.
Screw and Barrel Quality
Certificate:
**0%Quanlity
Inspection
As the
screw and barrel are the important parts for plastic extruders and
injection molding machine,they affect the machine performance
and quality directly,therefore,SHEEN established quality
control system strictly as ISO ***1:***8 International Quality
System, our every production process is under strict
inspection , Those provides solid foundation for our
quality products!What we need to do is to make sure best
quality of each screw and barrel,Till now,our screw and barrel
has been sold to more than *0 countries in the world and enjoy a
good reputation by our customers!
My
letter to all my customers:
Dear friend,
Thanks for visiting our website,nice to meet
you! Anyone wont buy any products from strangers until they know
each other better,but it's a long time for you to understand a
strange supplier well,then how you can find a best supplier during
so many factories is a
problem! Alice believe that
every customer is the turning point of her life,she is very gald to
make friends and do business with
you,if you trust alice so
much,just give each other an opportunity to know each other
better!
My
skype id :alicecomeon*0
My
yahoo id:sheenscrew*8
Just dont hesitate,choosing us is your best
choice! Alice is here all the time! Thanks a
ton!
Country: |
China |
Model No: |
XR-SJ15-360
|
FOB Price: |
800 ~ 28000 / Set (Negotiable)
Get Latest Price
|
Place of Origin: |
Zhoushan |
Price for Minimum Order: |
800 per Set |
Minimum Order Quantity: |
1 Set |
Packaging Detail: |
Film Wrapped in wooden case without fumigation( export standard) |
Delivery Time: |
25 working days after get 30% downpayment |
Supplying Ability: |
100 Set per Month |
Payment Type: |
T/T, L/C, Western Union |
Product Group : |
Bimetallic screw and barrel
|