Product Description

Introduction:

1. IEC ****1 Test for electric cables under fir conditions Circuit integrity
2. IEC ****1 Part *1 Fire alone at a flame temperature of at least **0˚C
3. IEC ****1 Part *1 Cables of rated voltage up to and including 0.6/1kV
4. IEC ****1 Part *2 Fire with shock at a flame temperature of at least **0˚C
5. IEC ****1 Part *1Fire with shock Cables of rated voltage up to and including 0.6/1kV

1. Heat Source : AGF Ribbon Type Propane Gas Burner
2. Structured with 3 rows of cross holes, Average front width of burner: *5mm, Hole diameter: 1.*2mm, Distance between the center: 3.2mm.
3. A polished hole row in pilot hole for flame preservation in both faces of Burner plate.
4. Two thermocouple are horizontally installed separated *5mm left and right of burner center-line to check temperature.
5. Mass flow controller to regulate the gas and air flow, the accuracy is not less than 1.5%.
6. Software can show the burner calibration temperature, propane and air flow rate etc.
7. The current is provided by a three-phase star transformer with sufficient capacity to maintain the required test voltage when circuit integrity cannot be maintained.
8. Conductor connection indicator (LED indicator) to form a current.
9. The voltage value is automatically set by software and adjusted by a panel controller.
10. Digital display of the current and voltage data, accuracy of current is 0.**1A.
11. Current protection using fuse with 2A.
12. The real-time measurement data of all current and voltage are collected by computer, and the curves of current and voltage are generated.
13. When circuit integrity cannot be maintained, the corresponding indicator lamp is extinguished, the computer automatically determines the state and records the time, and sends out the sound and light alarm.

1. Electrical: AC **0V *-phase, *0/*0Hz, *0A
2. Ambient Temperature: Operating *0°C to *5°C
3. Testing room: 3,**0 mm (W) x 3,**0 mm (D) x 3,**0mm (H)
4. Gas: Air and Propane