Product Description

Chinese Manufacture Directly Supply Car Spare Parts Brake Pads

    General by the brake pad steel plate bonding, heat insulation layer and the friction blocks, steel to rust after coating, the coating process using SMT - 4 furnace temperature tracker to detect temperature distribution in the coating process to ensure quality.The heat insulation layer is composed of no heat transfer materials, heat insulation.Friction block is composed of friction materials, adhesives, squeezed when the brake on the brake disc or drum brake friction, so as to achieve the purpose of the vehicle deceleration braking.Because of friction, the friction piece will gradually be wear and tear, generally the lower the cost of the brake pads wear faster.

Maintenance method of brake pads

1. Under normal driving conditions per 5000 km to check a brake shoe, not only to check the rest of the thickness, also check the status of a shoe wear, whether the degree of wear and tear on both sides, whether return freely, etc., found that abnormal situations should be dealt with immediately.

2. Generally speaking, iron brake shoe lining and friction materials of two parts, must not be friction materials such as grinding up part did not have to change the shoe.Jetta car front brake shoe, for example, the thickness of the film is 14 mm, and change the limit of the thickness is 7 mm, including more than 3 mm iron plate thickness and thickness of the nearly 4 mm of friction materials.Some vehicle brake shoe with alarm function, once the wear limit is reached, the instrument will alarm prompt replacement shoe.Reaching the limit use shoe must be replaced, even if it is can use for a period of time, will also reduce the braking effect, affect the safety of driving.

3. The change you want to change original spare parts provide brake pads, only in this way, can we make the best braking effect between disk and pads, minimum wear and tear.

4. Replace the shoes for a little while must use a special tool to brake pump head back.Cannot use other crowbar hard back, such easy to cause the brake pliers guide screw bending, make the card to death.

5. After the change, must be several feet brakes, to eliminate the clearance between the brake disc and shoe, cause the first foot brake, prone to accidents.

6. Brake shoe after replacement, need to running in 200 kilometers in order to achieve the best braking effect, just change the shoe must be careful driving  

Product display

Product details show

Packaging & Shipping

We adopt standrad exporting package,use environmental protection materials to make sure the package is suitable to long distance transportation.

Our customers have a wider range of processing choices for transportation mode: