Product Description

ATD CNG DDFI Conversion Kit for **8 Cylinders truck

ATD CNG DDFI (Diesel Dual Fuel Injection )Conversion Kit  is a CNG (compressed natural gas) conversion kit to use mixture of diesel and CNG as the dual fuel simultaneously in **8 cylinders diesel trucks. By the programmable ECU controlling the gas injection time of CNG injectors, allows the air-cng  mixture injecting thru the air intake manifold into the combustion chamber according to the engine rpm, tps sensor and temp. sensor

By using our CNG/DDFI Kit,you can use Natural Gas simultaneously with diesel as a dual fuel alternative.which you can save your transport expense by *0%.

Our DDFI kit is an ECU/Program controlled Injection kit,which can be tuned by Lap top Note book according to the rpm.of the engines,and can be used with every **8 cylinders diesel engines.

The installation is easy,you just the kit as the manual,without any engine modification, and install CNG cylinders,the kit are ready to be tuned by Notebook. You can adjust the ratio of diesel and CNG fuel to be used for every rpm. of the engine.

you can reduce using diesel fuel by ****0% with increasing the engine power and torque by ****0%

Our kit can be used with every Turbo engines.

Characteristics

-Programmable ECU controls CNG injection by Duty Cycle control

-Injection time of CNG depend on engine rpm, tps sensor control between *******0 rpm. (tunable by notebook)

-Engine starts by diesel and runs by diesel at idle speed.

-without any possibility of engine breakdown  by various sensors : knock sensor, temp. sensor and controlled by the ECU

-Diesel can be saved up to ****0% by using CNG instead.

-Speed acceration ,engine power and torque increase  ****0%

ATD CNG DDFI Conversion Kit consists of

-ATD programmable ECU (Thailand proprietary)

-ORYSA  CNG Pressure Reducer (Agentina)

-Bosch software controlled Actuator

- Temperature sensor and Injector Module sensor

-OMB CNG High Pressure Solinoid (Italy)

-AEB CNG Filling Valve (Italy)