Product Description

Specifications:

Heat exchanger: *0M cooper coiler in Tank

Tank:   **0L – **0L 

Inner tank: Stainless steel food grade SUS ****2B,   Thickness: 1.2mm 

Outer tank: Colorplate                                           Thickness: 0.*1mm

Thermal insulator: Polyurethane foam                      Thickness: *0mm

Operate temperature:  >**5°C

Work pressure: 8bar (0.8 Mpa)

Frame:    Material: Galvanized sheet

              Fasteners: stainless steel screws

              Angle: *0, *7, *8, *5

              Thickness: 1.2 mm

Seal Material: polymer silica plastic

Tube Specifications are at the bottom

Working principle:

The pressurized water tank has no exhaust hole, therefore, it must bear the pressure came from tap water and hot water. When use, the hot water comes out because of water pressure. Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressure water tank. In the case, the water inside the tank becomes hot. No water in the heat pipe makes the whole system could bear pressure.

Installation Instructions:

Because of its work principle, it can pressure up to 6 bar(0.6Mpa) when operates.

So it needn’t height fall. Naturally, you can install the solar water heater on the roof, ground, or on the balcony, when you use hot water on the ground floor or on the second floor.