Product Description

USAGE: KE model is used for the removal of large amounts of sand and other fine solids. When the sand concentration is high it is substantial to use a circulation screen filter series K. In order to avoid interruption of filtration during the cleaning process filters with brush should be preferred.A fertilizer tank or injector could be easily installed, by using the 3/4" ball valves of the fertilizer control head, in order to achieve fertilizing during the filtration procedure. CONSISTS OF: a sand separator (hydrocyclone) and a screen (series O, K) or disc (series D) filter, a fertilizer control head to connect the fertilizer tank or injector, inlet and outlet manifolds (S type) for connection to the main pipes and a metal support (base). EQUIPPED WITH: Master valve (gate), ball valves to connect the fertilizer tank or injector, pressure gauges (manometers), drain valves FILTER-MANUAL CLEANING: By opening the flush valve periodically, particles are removed. It is necessary to dismantle periodically the screen filter in order to clean the screen (take out the cartridge and rinse it thoroughly with water under pressure). Semi-automatic filters from 2" up to 4" are equipped with a cleaning mechanism consisting of a brush that scrapes the debris from the filtration surface. FILTER-SEMI AUTOMATIC CLEANING: Semi-automatic filters are equipped with a cleaning mechanism consisting of a brush that scrapes the debris from the filtration surface. When the difference in pressure between the inlet and outlet exceeds 0, 6bar screen is getting clogged. Turn the brush handle **4 times to scrape the debris from the screen. Open the flush valve so to drift out all the removed particles. It is necessary to dismantle periodically the filter in order to clean the frame thoroughly (with water under pressure) HYDROCYCLONE-MANUAL FLUSH: The flushing frequency depends on the local conditions and the quality of the water. It is very important to open partially the drain valves so to flush out the contaminants trapped in the collecting chamber and of-course to open the valves thoroughly at least once per day for approx. *5 to *0sec (depends on the quantity of the particles). HYDROCYCLONE-AUTO FLUSH: Here by you will find our recommendation, which should be adapted according to the local conditions. Periodic time: 3h (and/or at least once per day) Flush time: *0sec Dwell time: *0sec