Product Description

Connector Socket:

• Connector socket have three parts: socket lid, socket and connector PCB.
• Solder connector PCB on test PCB, then mount socket on connector PCB.
• Pitch range from 0.*0 to 1.*7mm
• Key material: PEI,Peek,Torlon,PPS.etc
• Contact with top pogo pin

• Solder connector PCB on test PCB,then mount socket on connector PCB.
• ​Connector PCB will be reballed, and size is same as that of chip.
• No need to relay out PCB, it is time and cost saving solution.
• Wired out device test pad via connector PCB.

• Lid&house material:                             AL      
• Insulation material:                            PPS,PEI,PeeK,Torlon
• Contact material:                               POGO pin(spring probe),silicone rubber
• Contact length:                                 Min2.5mm,Max7.2mm
• Contact rated current:                          Max 6.2A
• Contact temperature rating:                     **0 - ***0℃
• Contact preload:                                0.*5mm,0.2mm,0.*5mm(optional)
• Contact force:                                  Min 6gf, Max *5gf
• DC resistace:                                   Min 0.1ohm, Max**0mohm
• Life span:                                      Min *0k cycles, Max **0k cycles
• Contact application pitch:                      Min 0.*7mm
• Contact material:                               top/bottomplunger: Becu/Au plated