Product Description

The product is water based and hence no special safety measures are 
required other than ordinary painting methods. 
Stir the paint thoroughly to attain homogeneity. Add clean water into the 
paint as required, depending on application method, and stir thoroughly for 
few minutes. Strain the paint through Nylon filter cloth of **0 mesh size and 
apply uniformly over the surface. The temperature of the substrate should be 
minimum 3°C above the dew point of the air, temperature and relative 
humidity measured in the vicinity of the substrate. Good ventilation is 
usually required in confined areas to ensure correct drying. All equipments 
used for above should be properly cleaned.