Looks like you are not TradeKey.com's Member yet. Signup now to connect with over 9 Million Importers & Exporters globally.
Join Now, its Free |
Book call on your favorite time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Free Member

Copper mould tube, mold tube


Copper mould tube brochure

13 ~ 18 / Kilogram ( Negotiable ) Get Latest Price


13 per Kilogram

2 Piece

Standard wooden cases for ocean shipment

30-55 days

35000 Piece per Year

D/P, L/C, T/T

Contact Now

Product Specification

Length : 600-1100mm Radius : 3000-17000mm Thickness : 6-50mm Hardness : Min.85 HB Elongation : 20% Tensile strength : 200-445Mpa Coating thickness : 0.10-0.12mm

Product Description

Copper mould tubes for CCM
Copper mould tubes are used as a cooling spare part for continuous casting machines.
  1. Square copper mould tube
  2. Rectangular copper mould tube
  3. Round copper mould tube
  4. Beam blank copper mould tube
  5. Non-standard copper mould tube
Square Mould   50X50~650X650
Rectangular (100~500)X650                     
Round mould    Ф110-Ф1500    
Design with double taper, triple taper
Multi-taper, parabolic taper and various kinds of continuous taper
Non-standard mould
Beam blank mould  


The materials of copper mould tubes should be the ones with good tensile strength, fatigue strength, proper hardness, low elongation and high heat conductivity coefficient. As a result, material like phosphorous deoxidize copperDHP,CUAGCR-ZR-CU are widely accepted by users of all countries.


Copper has lower hardness which leads to lower anti-abrasive property. Therefore, the area at the lower part of the moulds, where the stress increases drastically due to shells, will be more severely worn. To increase the life time of copper moulds, Uniform mould interior surface plating with suitable hardness is needed. Most of the copper mould tubes for small size billet casting are not used in any casting system where there are rigid casting stream support, therefore they are very sensitiveto be worn. We use hard chrome plating to increase the life of mould tubes. The plating thickness will be controlled in the best range. As for the coating of copper mould plates,based on our years of experience, we are able to provide Cr coating, Ni-Cr coating, Ni-Fe coating and Ni-Cr coating to meet the demand of various customers both at home and abroad.




1. Please use the copper mould tubes within one year.


2. Please store the copper mould tubes in someplace dry and well ventilated.


3. Keep the copper mould tubes away from acidic materials, especially the internal coating surface.


4. Polish the external surface of the copper mould tubes with sand paper if oxidized.


5. Pouring the molten steel to the center of the copper mould tubes


6. Avoid internal surface scratch of the moulds caused by manual operation.

Contact Us

Contact Person : Kris

Company:AMK Metallurgical Machinery Group Co., Ltd

Address:WEST BINJIANG ROAD, Wuxi, Jiangsu, China,214400


Kris < AMK Metallurgical Machinery Group Co., Ltd >
I want to know:

More Products From Other Suppliers

Copper Scraps Suppliers | Copper Scrap Exporters | Copper Scrap Manufacturers | Cheap Copper Scrap | Wholesale Copper Scraps | Discounted Copper Scrap | Bulk Copper Scraps | Copper Scrap Buyer | Import Copper Scrap | Copper Scrap Importers | Copper Scrap Copper Scraps Suppliers |
Filter Disc / Filter Element / Filter Cylinder Filter Disc / Filter
Rolled Copper Foil Rolled Copper Foil
brass cage brass cage
Cooper Mine Cooper Mine
Minerals Minerals
Copper cooling jackets for smelting furnace, copper cooling stave, blast furnace cooling stave, copper cooling water jacket Copper cooling jackets for
Copper scraps Copper scraps
High Purity Oxygen-free Copper rod High Purity Oxygen-free
copper ore philippines copper ore philippines
copper fittings copper fittings
PVC Insulation Electric Wire PVC Insulation Electric
Bright Shiny Millberry Bright Shiny Millberry
Copper Ore Copper Ore
Copper Ingots Copper Ingots