Product Description

The Corrugated cardboard production line is consist of :mill roll stand, single facer( cover adsorb or inner adsorb), paper feeding set, Dual Decks Feeding Across, bridge adsoption strain machine, mulriple pre-heater, Glue machine, heating tunnel, Baker and finalizing design system, thin blade, ***** (with rotrary blade), cardboard feeding machine, grantry stacker, sigle cutter, main gearing, glue supplying system, pneumatic system, electric appliance system, steam ***** The raw paper is fed from the raw paper stand, passing through the heating tunnel, where the paper is heated and the moisture inside the paper is adjusted. Then the paper is sent into the single facer corrugating device and is corrugated and shape-formed, adhered to another paper, forming single facer corrugated paper. After that, by the crane the paper is sent to pre-heated by the multi-phase pre-heated. The glue putting machine puts glue onto the paper, and the glued paper is sent to the dual surface heating and forming machine, at this moment the final corrugated paper is formed and outputted continuously. The formed paper then pass through the cutting and folding machine, where the paper is longitudinally cut and press-folded, and traverse cut, finally formed rectangle corrugated papers can be produced complete. At the end, corrugated paper is stacked, assorted, and counted by the stacking machine, and you will see the final products outputted by this whole line continuoushy. website: www-hbdsjx-com email: gracyzhang(at)yahoo(dot)com