Customized Terminal Bars GK******4
GK**1 Terminal series use high quality brass raw material,has
the characteristics of high-current- carrying capacity,
convenient-wiring and durable quality.With acid-pickling treatment,
products are not easily oxidized.Due to Precisely
manufacturing, it avoid the difficulty of reinstallation
after many times .
MODEL POLE NO. SPEC(MM) COLOR
GK******4 *6.2 6*9 BRASS COLOR
Requirements to a terminal body
1 The terminal body is manufactured from copper-zinc
alloy
2 The terminal body is to be manufactured in parallelepipedal
shape with mutually perpendicular side planes. Deviation of
perpendicularity is no less than 0,1mm
3 The other sharp edges are to be blunted
4 The surface of holes for wire mounting is to be smooth
without burrs, edge fins and etc.
5 The form of thread into threaded openings is to be
full without edge fins. Every opening is to have no less than three
full turns of a thread
We are Industrial Terminal Manufacturer.
Requirements to a Industrial Brass Terminal
1 The terminal is to be equipped with screws in the quantity
equal to the quantity of contact groups for the wire fixing
2 The screws are not to create troubles to next screws
at the operation
3 Dimensions and completed set of terminals are to
correspond to design documents.
4 Operation temperature range could be from minus *0 to
plus *0 °С.
Outgoing inspection
Visual Check:
- Bring out the absence of outer
damages, deep scratches, cracks, chips, corrosion on the terminal
and screws.
- All screws are to be entirely
tightened.
Temperature Rise Test :
- 5% of the batch of each
standard size, but not less than *0 pcs.
Flame Retardant Test:
- 5% of the batch of each
standard size, but not less than *0 pcs.
