Product Description

Defoamer for Cutting Fluids
Description

This metal cutting fluids defoamer is made of specially modified polyether and fluorine-containing raw material by the special technique.

Its easily to dissolve in water, with the excellent heat resistance, strong acid, and strong alkali resistance, it can keep high efficient foam control ability while under the conditions of high temperature, strong acid, strong alkali, high shear and high pressure, and its no demulsification, no oil floating.

It can be widely used in various kinds of severe foaming systems in a wide temperature range.

 

Characteristic

(1) Fast defoaming ability, lasting foam suppressing effect, small dosage, no any effect to the basic property of the foaming system.

(2) Good dispersibility and penetrability, perfectly compatible with oil product and cutting fluid.

(3) Good heat resistance, good chemical stability, non-corrosive, non-toxic, non-flammable, non-explosive, no adverse side effects.

(4) It is workable under the conditions of acid, alkali, salt, electrolyte and hard water.

(5) Comparable with a top quality product on market, while the price is much more affordable.

 

Technical Index

Model No.:  E***8/**9/**0

pH Value:  6.5~7.8

Appearance:  Milk white/ Light yellow liquid

Ionicity:  Non-ionic

Water-solubility:   Dissolve in water, excellent dispersibility

Viscosity(*5℃）:  **0～***0mpa.s

Note: Above data only shows the typical characteristic of this product, not represent the whole specification range.

The customized requirement is warmly welcomed.

 

Application

This defoamer is widely applies to:

Metal processing; Cutting fluid; Microemulsion; High water content hydraulic fluid; Glycol hydraulic fluid; Solvent cleaning; Acid & alkali aqueous detergent; Coolant fluid; Grinding (oil) fluid; Wire cutting fluid; Automatic assembly line cleaning machine; Large scouring machine; Lubricants; Saponified oil; EDM working fluid; Drilling fluid; Fine grinding fluid; Etching solution; Electrolyte wire cutting fluid; Alkali extraction method technique; Dehydrant, etc.

 

The application of the metal processing industry        

                            

Instructions 

Usage: Directly add this product to the foaming surface to remove foam, it also can be used with other powdered additives after mixing well.

Recommended dosage: 0.1~1%, the optimal dosage should be confirmed after the actual testing.

 

Packaging and storage

1. Packing: *0KG, **0KG, ***0KG /Plastic drum, or as customer required.

2. Storage: Non-dangerous goods, non-toxic, non-flammable. Should be stored sealed, in a cool, ventilated and dry place. Before used up, the container should be sealed tightly at around *5℃.

3. The shelf life is about *2 months.

4. Transportation: This product should be sealed well during transportation, preventing from moisture, water, strong acid & strong alkali.

Protective Measures

Please refer to （MSDS）>

Please contact us, we will provide you with the corresponding MSDS and solutions.