△Application :
Apply to clean, dry and grease-free surfaces. Apply sealant into the base of the joint so that it can completely fill the joint. Tool the surface of the joint immediately after sealant application to provide a smooth even finish and ensure the sealant wets both sides of the joint. Remove the masking tape after tooling. Avoid contact with various cleaning agents for solvents (e.g. bleach) whilst sealant is curing.

△Limitation :
Do not use in structural application. Do not use when substrate temperature is a above *0℃, below 4℃ or surfaces that are wet, oily, greasy, dusty or dirty. Do not use for sub-grade application, confined space or surface that requires post finishes or paintings.

△Caution:
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for *5 minutes and seek medical advice. Use in well ventilated area. Keep out of reach for children.