Product Description

Features:
The DM**0s is the smallest Linux satellite TV receiver
**0 MHz IBM PowerPCProcessor (**0 Mips)
2 LED status
Linux Operating System
Fullautomatic service scan
Supports directly bouquet-lists (indirect unlimited)
Supports multiple LNB-Switching control (supports DiSEqC)
1 x Smart card-Reader
Unlimited channel lists for TV/Radio
SPDI/F nterfacefor digital bit stream out (AC*3 / DTS)
MPEG2 Hardware decoding
Channel-change time<1 second
Fully adaptable OSD in many languages(skin-support)
**0Mbit full duplex Ethernet Interface
Supports EPG(electronic program guide)
1 x Scart-interfaces (fully controlled bysoftware)
Specifications:
Video decoder:
Video Compression MPEG*2 and MPEG*1 Compatible
Video Standard PAL and NTSC
Video Format 4: 3 / *6: 9
Footage *6: 9, Automatic Assimilation for *6: 9 TV-Device(over scart)
Letterbox Precolating For 4: 3 TV-Device Audio Decoder
Audiokompression MPEG*1 & MPEG*2 Layer I and II
Audio Mode Dual (main/USB), Stereo
Frequency: *2kHz, *4.1kHz, *8kHz, *6kHz, *2.*5kHz, *4kHz
VIDEO PARAMETER:
Input Level FBAS 1 Vss +/*0.3 dB on *5Ohm
Teletext Filter in Conformity with ETS **0 **2 Standard
TV-Scart:
Frequency Range **0...***0MHz
Signal Level - *5 dBm...**5 dBm
Signal-to-Noise Level *2dB max
DBS-Tuner Input Connector F-Type Female
Input Impedance *5 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol Rate 2...*5 Mbaud/s, SCPC/MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, Automatic Assimilation
Roll-off Factor *5%
Demultiplexing According ISO ******1
Ethernet:
**0 MBit compatible, bi-direktionalinterface
Function Update of Firmware and Preprogramming
LNB Power andpolarisation:
LNB Current **0mA max.; Short-circuit-proof
LNB Voltagevertical<*4V without load, >*1, 5V at **0mA
LNB Voltage horizontal<*0V without load, >*7, 3V at **0mA
LNB shut-off atStandby-Mode
Count of active satellite position:
DiSEqC 1.0/1.2 SATPOSITION / SAT OPTION
DiSEqC - Rotor Control
Output digital:
OutputLevel 0, 5 Vss on *5 Ohm
Sampled Data Filtering *2 kHz, *4.1 kHz, *8kHz
S/PDIF-Output optical (AC3)
Output analog:
Output Level L/R 0, 5Vss on **0 Ohm
THD>*0 dB (1 kHz)
Crosstalk<**5dB
Serielle Interface RS **2:
Typ RS**2 bidirectional
Bit rate**5, 2 kBit/s max.
Plug Connector SUB-D*9
Function Update of Firmware and Preprogramming
Power consumption:
<*0W/ *2V
Input voltage:
DC*2V, alternating acurrent +/- *5%
Extern powersupply:
Input:
******0V AC / ****0Hz / 0, 6A
Output:
*2V = /1A
Others:
Ambient Temperature **5° C...**5° C
Humidity<*0%