Product Description

1.Shell 1.1 Crowned steel shell with ti-rust oil , carbon steel or **4stainless steel 1.2 Surface be treated with screw lathe, rubber lagging or plastic wheel 1.3Different Length of shell are available ***** 2.1AC induction motor , open-ended oil-impregnated.By Euro Standard IEC. 2.2By symmetrical winding, and the winging insulation class is F/H 2.3Most common voltages available are 1******1***0V and 3***0—3***5V at *0 or *0 Hz(*-phase & *-phase motors) 2.4Backstop (anti run-back) or electromagnetic brakes are available 2.5with thermal protector ***** box 3.1High strength cast aluminium light-weight gearbox. 3.2 Steel gear transmission. 3.3 Gears manufactured from alloyed casehardened steel ground and/or honed to a high quality finish ensuring low noise level and longevity 4.Sealing systerm 4.1Triple shaft sealing system—degree of protection IP*6/*7 (standard IEC norm) 4.2 Noise level is ****0db measured at 1m distance in complete sound dead room 4.3Tested before shipment for the Press, electrial and noise ***** Pre lubricated with oil and oil change recommended every *0, **0 hours ***** outlet 6.1Straight connection 6.2 Elbow connection 6.3 aluminium terminal box 6.4Cable length minimum 1.2 metres outside shaft 7.Package Carton/wodden box 8. Temperature, 8.1Temperature arise max ****0degree above environment temperature, under normal load condition 8.2To be used in the horizontal position only More pls check our website or ctc me directly Any special requirements pls let me know in advance