Product Description

EC Tester| EC Meter| EC pen SPECIFICATIONS Range: 0~***0us/cm Resolution: 1us/cm(0~**9us/cm) *0 us/cm(***0~***0us/cm) Accuracy： ±2% Full Scale Calibration： Factory Calibrated Auto shut-off: *0 minutes Temperature Compensation: Automatic Operating Temperature: 0°C to *0°C Power source： 2×1.5v ( cell) size: **2X *5X*5mm weight: *6g OPERATING INSTRUCTIONS 1. Remove the protective cap. 2. Press the ON/OFF once out of the water. The tester will read “**0”. 3. Immerse the tester into the water no more than 2 inches. 4. Wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes (****0seconds), press the HOLD to view out of the water. 5. Press the ON/OFF again to turn off the tester. The tester will shut off automatically after *0 minutes of non-use. 6. After usage, shake off the water from your tester or wipe it with a tissue. Note: If the tester displays a flashing”X*0”icon, multiply the reading by *0. Important: Do not drop the entire tester in the water or dip beyond the maximum 2” level. This product is not waterproof. Tester is not meant to be used in hot water. Calibration: your meter has been factory calibrated to **0us/cm, which is suitable for most applications. Re-calibration may be necessary from time-to time, depending on usage. Maintenance If the meter cannot be switched on or the display fades, please replace the batteries. Please pay attention to the polarity of battery. If pin electrode is dirty, clean by rinsing it in alcohol for 1 minute. Do not touch or scratch the pin electrode. Warranty This instrument is guaranteed from all defects in material and production for a period of three year from the date of purchase. If during these periods the repair or the replacement of the instrument is required and the damage is not due to negligence or erroneous operation by the user, please return the instrument to either your dealer