Product Description

Features:

• Body composition and flexibility, can be adapted to the needs of different pressure
• Chosen hysteresis synchronous motor, a magnetic hysteresis clutch protection, can produce stable torque in the case of the valve can still pause at any position;
• Reversing control: can be flexibly flexible wiring reversing, to match different body;
• valve flange connection, constructed in accordance with IEC international standards;

• When indicated on design drawings without valve installation position, the control valve is usually installed in the return pipe road
• Former Install the regulator to clean the pipes, valves, filters to be installed on the inlet side
• Reserve enough space for installation, for maintenance
• Consistent with the direction of the arrows ☆ valve body and the valve on the flow medium
• Drive can not be covered with insulation material, to prevent the drive cooling equipment adversely.
• Technical Parameters:
• Nominal pressure: 1.6Mpa ☆ stroke range: 40mm
• Flow characteristics: equal linear or percentage ☆ media: cold / hot water, steam, ethylene glycol, etc.
• Valve size: DN65-DN450 ☆ Body material: steel or cast iron
• Stem: 1CR18N19 (AISI302) Ф9 ☆ stainless steel Stem Seal: PTFE + nitrile rubber stopper ring
• Medium temperature: 0-120 ℃, 0-170 ℃, 0-380 ℃ ☆ leakage volume: less than 0.03% KV value
• Working temperature: -10 ℃ -70 ℃, 10% -95% RH non-condensing ☆ Storage temperature: -20 ℃ -85 ℃