Product Description

Installation:
1.Please move the repair machine to the repair location; 
2.Please fill the raw rubber to the broken part. (The filling raw rubber part in the vulcanization technics can be taken as reference, or our technical workers demonstrate it as adjusting.)
3. Please put the bottom machine frame rightly aiming at the broken part, meanwhile, put the hydropress plate and the bottom heating plate under the broken part.
4.Please put the top heating plate on the broken part, and lay up the thermal baffle, and then install the machine frame.( ※remark: DWXBJ low voltage series machines are integrative machines.)
5.Install the screw and screw down.
6.Please connect power with electrical control cabinet with primary cable, and separately connect top heating plate with electrical control cabinet, and the bottom heating plate with electrical control cabinet by secondary cable, meanwhile, please separately connect top heating plate and electrical control cabinet, bottom heating plate and electrical control cabinet with temperature-measure components. Please pay attention to the corresponding electrical control cabinet when connecting. 
7.Please connect hydropress plate and pressure-test pump with high pressure hoses, and then start the electrical control cabinet, meanwhile, and pump water into the hydropress plate to the condition of vulcanizing pressure.