End brushes are suitable for industrial cleaning applications where restricted space is an issue. Typical wire end brush applications include: polishing molds or dies, cleaning castings, brushing the internal surfaces of holes, flash removal, spot facing, and surface preparation for welding. Typical use involves a hand-held high speed air tool, electric drill, drill press, or robotic finishing equipment.

Solid Wire End Brushes are available in crimped carbon steel, stainless steel, brass, or bronze wire . Synthetic and Natural Fiber Options include: Abrasive Nylon, Nylon **6, Tampico, Polyester, Polypropylene and Horsehair. Wire size ranges from .**3" to .**0". Abrasive Nylon ranges from **0 Grit (fine) to *6 Grit (coarse). Other synthetic materials are generally available in .**5" through .**0" for end brush applications. End brush diameters include 3/8", ½". ¾", and 1" brush part. Standard shank dimensions are ¼" wide by 7/8" long. Standard trim length for Solid Fill End brushes is 1". Adding bridles to an end-brush reduces the tendency to flare-out during operation and concentrates the wire points on the work surface directly in front of the brush. Bridles may be removed as the brush wears. The end brush cup may also be coated with a plastic material to reduce damage from contact with the work piece.

Knot Style End Brushes are suitable for severe cleaning applications such as removal of heavy scale, corrosion, weld spatter, and rust. Available in .**4" and .**0" carbon steel and stainless steel in ¾" and 1 1/8" cups, and with optional bridles to control brush face. Standard shank dimensions are ¼" wide by 7/8" long. Standard trim length for Knot Style End brushes is 7/8" to **1/8".

Flared Wire End Brushes provide side cleaning action, and will not score blind hole bottoms. Flared end brushes are available in a variety of diameters measured across the flared brush part: 1", 1 ¼", 1 ½", 2", 2 ¾", 3", and 4". Flared End brushes can be filled with steel wire, stainless steel wire, or brass wire in sizes from 0.**5" to 0.**0".

Hollow Center End Brushes are designed to clean around protruding objects. The hole in the center also prevents balling up of the wires in the center of the brush. Hollow center end brushes are available in ¾" and 1" diameter, and can be filled with steel, stainless steel, and brass wires in a range from 0.**6" through 0.**0". Standard shank dimensions are ¼" wide by 7/8" long. Standard trim length for Hollow Center End brushes is 1".