FOB Price
Get Latest Price120 ~ 450 / Liter ( Negotiable )
|1 Liter Minimum Order
Country:
China
Model No:
AMS-99V
FOB Price:
120 ~ 450 / Liter ( Negotiable )Get Latest Price
Place of Origin:
Shanghai
Price for Minimum Order:
120 per Liter
Minimum Order Quantity:
1 Liter
Packaging Detail:
barrel
Delivery Time:
5-7days
Supplying Ability:
100000 Liter per Year
Payment Type:
T/T
Product Group :
-
Contact Person Mr. Clement
Xinjunhuan road, Shanghai, Shanghai
-Easy application, applied at will and freely, excellent leveling ability;
-High transparency, not affect visibility and lighting requirements, significant heat insulation and energy-saving;
-Strong weather resistance, after QUV 5000 hours testing, no change in coating, up 10 years service life;
-High surface hardness, good wear resistance, adhesion to grade
0.
Application:
Used for heat
insulation and energy-saving of building glass, such as business
buildings, hotels, high-end restaurants, zenith glass, residential,
etc.
Used for
industrial glass with requirements of infrared and ultraviolet rays
shielding.
Usage:
Please read the
following application process, methods and precautions, and watch
application video before use. Application ambient temperature
15~40℃, humidity below 80%. No dust
and other unfavorable factors.
(â… ) Application
Process
(â…¡)
Application Method
Step 1: Prepare tools and materials
as follows:
-Purified water:
used for the preliminary cleaning of the glass surface and the
purpose of using purified water is to reduce new impurities in the
process of cleaning the glass.
-Cleaning agent:
cleaning glass with special cleaning agent that has strong
decontamination ability, acting as the first glass
cleaning.
-Anhydrous
ethanol: 90% industrial alcohol is required to clean the glass for
the second time to remove the residual cleaning agent on the
surface of the glass.
-Plastic strip and
protective film: the glass frame is protected by plastic strip
during construction to ensure that the contact area between the
film surface and the glass frame is orderly. The protective film is
attached to the bottom edge of the glass frame to avoid
contamination of the wall and the ground during the coating
process.
-Coating and
diluent: solvent-based coatings can be divided into main materials
and diluents, and the corresponding amount of diluent should be
added according to the temperature of the same day in order to get
better brush. When the temperature is higher than
30 ℃, diluent(5% of the weight of
the main material) should be added, be sure to add the diluent into
the main material and mix evenly before application.
-Measuring cup and
dropper, feed plate: used for weighing diluents, and using a small
amount of dropper to achieve accurate components, and finally pour
into the tray.
-Non-woven paper
and towels, sponge wipe: sponge wipe dipped in the appropriate
amount of cleaning agent, in a spiral way to wipe the surface of
glass, with a towel to wipe the remaining cleaning agent, non-woven
paper is used to clean the glass surface during the second
anhydrous ethanol cleaning, and wipe the tray and measuring cup
with the non-woven paper at the same time each time the material is
taken.
-Scraper tool:
clip the nano sponge strip onto the scraper tool, then dip it into
the coating and brush it.
Note: anhydrous
ethanol and pure water need to be provided by customers because of
inconvenient transportation.
Step 2: Clean the
glass. The glass is cleaned twice with special cleaning agent and
absolute ethyl alcohol.
The cleaning agent
is first extruded onto the sponge, and a small amount of purified
water is sprayed on the sponge, and then the sponge is wiped on the
surface of the glass by the sponge dipped with the cleaning agent
until the surface of the glass has no oily stain, and then the
cleaning agent is removed by a clean towel; (Note: When the towel
is wiped, the corner should be highlighted, because the corner is
not easy to clean after the adhesive tape is attached. The erase
cleaning agent can be used with a same towel, but it is not
possible to use a towel that is contaminated with coating and
dust). Clean the glass with anhydrous ethanol for a second time;
Spray the glass with appropriate amounts of anhydrous ethanol, then
wipe the glass with non-woven paper until there is no visible dust.
Anhydrous ethanol can no longer touch the glass after it is wiped
clean.
(Note: the corner
is the most prone to residual dirt, focus on cleaning and
wiping)
Step 3: border
protection.
In order to avoid
inadvertently touching the glass frame during the coating process,
and to keep the edges of the coated glass neatly, it is necessary
to use the plastic bar to cover the glass in accordance with the
regulations, to ensure that the cover is intact before entering the
next procedure. It is important to make sure that the joint of
coating and plastic strip is neat and orderly, and that there must
be one side glued to the glass when pasted, especially at the
corner, so as to ensure that a line is neat and
beautiful.
Step 4: Formal
coating (make sure the dry glass begins to be coated after
cleaning).
-Coating weighing
and preparation:
Clean the tray and
the measuring cup with absolute ethyl alcohol and non-woven
paper.
Pour the
corresponding amount coating into the measuring cup according to
the standard of 20 g/ m2. When the air temperature is higher than
30℃, the diluent with the weight of 5% of the weight of the main
material is required to be added into the main material and mixed.
The mixing method comprises the following steps: adding the diluent
into the measuring up according to a proportion, and then pouring
the diluent into another measuring cup filled with a coating then
shaking well.
Coating dosage
formula: glass height(m) × width(m) × 20g/m2
(Note: clean the
tray and measuring cup with anhydrous ethanol and non-woven paper
before and after each use.)
-Formal coating.
According to the construction glass area according to
20g/m2, weighing the required
coating, and pour all into the feed plate; Then use a nano sponge
absorbed the appropriate amount of coating, and scrape on glass
surface evenly from right to left, then from the bottom up to
ensure that the coating is evenly coated on the whole piece of
glass. Finally, starting from one side, the film is finished from
the bottom up to make sure that the film is free of bubbles, no
flow marks and uniform on the surface of the glass.
(Note: The process
of coating should be uniform speed, uniform strength and do not
push too much; from different angles to observe more, whether there
is an uneven phenomenon; After finishing, if the defect is found,
the scraper tool should be used in the shortest time to swivel a
few times in the defective place, then scrape it up and down twice
quickly, and then re-finish it. A small number of crystal points
may be observed on the surface after the coating is completed, but
no need to worry that, as the crystal points will disappear within
24 hours.)
Step 5: Normal
temperature curing
After 20~60
minutes (it depends on the ambient temperature), the coating
surface is basically solidified. Within an hour of curing time, no
object can touch the coating; Within a week, no sharp thing can
touch the coating.
Step 6:
Checking
After the surface
of the coating is dried and solidified, remove the material such as
the paper adhesive tape, the protective film, etc
carefully.
Step 7: Record and
fill in the form
Record ambient
temperature, humidity, surface temperature and so on, do the
finishing work well.
(â…¢) Precaution
-In the process of
coating use, each take-off action should be rapid, as far as
possible to reduce the contact time between the coating and
air;
-Ambient
temperature shall be between 15 and 40℃, and the humidity shall not
be higher than 80% and there should be no water drops on the
surface of the glass;
-Open flame or
spark is not allowed nearby, and smoking is prohibited;
-Stored in a cool,
well-ventilated place, avoid sun exposure, not close to heat,
fires, power sources;
- Keep out of
reach of children, and avoid contact with skin or eyes;
- In case of
contact with eyes, flush with copious amount of water, call a
physician.
-Not fall onto
other surfaces to avoid corrosion, if contact, wipe with anhydrous
ethanol as soon as possible.
*Disclaimer
The sellers,
users, transportation and depositors (collectively referred to as
users) of the product need to obtain an effective, the latest
version of the chemical safety technology specification (MSDS) from
the official channels of Shanghai Huzheng Nanotechnology Co., Ltd.
and please read it carefully. It is suggested that users should
receive professional training.
Â
Country: | China |
Model No: | AMS-99V |
FOB Price: | 120 ~ 450 / Liter ( Negotiable ) Get Latest Price |
Place of Origin: | Shanghai |
Price for Minimum Order: | 120 per Liter |
Minimum Order Quantity: | 1 Liter |
Packaging Detail: | barrel |
Delivery Time: | 5-7days |
Supplying Ability: | 100000 Liter per Year |
Payment Type: | T/T |
Product Group : | - |