High Speed Thin Board Slitting Machine

Product Description

~Thin board high-speed slitting machine is one member of slitting machine line, which is used to shear metal material longitudinally and recoil the fillet. This thin coil sheet slitting machine is suitable for cutting material with thickness range within 0.2 mm~2.0mm, while a slitting speed up to *0m/min. what have to be stated is that, different profile is manufactured according to customers' idea, and different profile has different thickness range, but all thickness range should be within 0.2~2.0mm, and you can adjust any speed as you like within 0—*0m/min.



Flow chart of this slitting machine line:

 Hydraulic coil car→single mandrel decoiler→head-guiding head shovel and 2 rolls feeding →sheet head shearing machine→Pit(1)→deviation rectifying(sheet guiding)→slitting→side scrap recoiling→pit(2)→pre-separator and damping ,tensioning machine→coil recoiler→unloading coil car→hydraulic control →electrical control



Technical parameter data of slitting machine line:

 Raw material: steel coil material, common carbon steel, galvanized steel or pre-painted steel

 Coil thickness: 0.2mm**2.0mm (note: different profile is manufactured according to customers' idea, and different profile has different thickness range, but all thickness range should be within 0.2~2.0mm)

 Coil diameter using this slitting machine line: ≤ ф***0mm

 Coil width: **0mm*****0mm

 Coil inner diameter: ф**8, ф**0

 Coil weight when use thin board high-speed slitting machine: ≤*5T

Way of slitting: stands round blade slitting:

 Specification of slitting shaft: ф**5mm×***0mm

 Material of blades shafts: *0Cr hardened chrome and polishing

 Material of blades: 6Crw2Si, hardened chrome HRC*0—*2degrees

 Slitting motor power: DC*5KW motor with joint coupling plus speed reducer

 Slitting speed: ****0m/min adjustable (You can adjust any speed as you like within 0—*0m/min)

 Slitting width accuracy of the thin board high-speed slitting machine: +/*0.*3mm

Damping and pre-separator (tension rolls):

 Recoiling specification: ф**8mm×***0mm

 Separator discs: ф**0mm×3mm, *5Mn q

 Coil pushing arm power: ф*0mm×***0mm

 Power of recoiling: *5KW DC motor

 Motor control: Euroasia control **0

 Recoiling speed: ****0m/min adjustable

Hydraulic control of Thin Board High-Speed Slitting Machine:

 Hydraulic station 1 set

 Pressure: *6Mpa

 Power: 7.5kw*4

Electrical control of Thin Board High-Speed Slitting Machine:

 Electrical cabinet 1 set

 Operation cabinet 2 sets

 Mitsubishi PLC