Hot! Shenzhen Jinhua LED resin letter glue adhesive By Shenzhen Jinhua Electronic Materials Co., Ltd.,

Hot! Shenzhen Jinhua LED resin letter glue adhesive

FOB Price

Get Latest Price

15 ~ 18 / Kilogram

20 Kilogram Minimum Order

Country:

China

Model No:

312AB-8

FOB Price:

15 ~ 18 / Kilogram (Negotiable) Get Latest Price

Place of Origin:

Price for Minimum Order:

15 per Kilogram

Minimum Order Quantity:

20 Kilogram

Packaging Detail:

20kg each set

Delivery Time:

three days

Supplying Ability:

10000 per Month

Payment Type:

T/T, L/C, D/A, D/P, Western Union

Product Group :

Product Specification

Classification: Other Adhesives
Usage: LED letters,
Brand Name: jinhua

color:transparent

Product Description

Epoxy Resin 3*2AB*8
Feature
Epoxy resin *12AB*8 can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-yellow, high transprancy, no ripple, bright in surface, it can be cured at room temperature or high temperature. ..

Application
**2AB*8 can be widely used for high quality LED channel letter, photo frame, drops of glue, signs, cards, crafts, lamp potting and mould filling, etc..

Properties before Hardening

Part	*2A8	*2B8
Color	Transparent	Transparent
Specific gravity	1.15	0.96
Viscosity (*5℃)	*0-*0CPS	**0 MAXCPS
Mixing ratio	A: B = *0:3(weight ratio)
Hardening conditions	5 ℃×8H to 10H or 5℃×1.5H (2 g)
Usable time	5℃×40min (*0g)

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below *5 ℃, please heat A glue to *0 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than *5%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than *5%, is not suitable for room temperature curing, suggest to use the heat curing.

Properties after Hardening

Hardness, shore D	<*5
Withstand voltage, KV/mm	22
Flexural strength, Kg/mm2	*8
Volume resistivity, Ohm3	1x05
Surface resistance, Ohmm2	5X05
Thermal conductivity, W/M.K	1.*6
Induced electric loss, 1KHZ	0.*2
Withstand high temperature, ℃	*0
Moisture absorption, %	<0.*5
Compressive strength, Kg/ mm2	8.4

Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact,  in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.

Storage And Shelf Life
1, Store at the tempeture of *5°C or cool and dry place.  Avoid from sunlight, high tempeture or hign humidity enviroment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room tempeture of *5°C.

Notice: The above data is typical data measured by the laboratory environment under
the temperature of *5 ℃, and humidity of *0%. For customers reference only.

Country:	China
Model No:	312AB-8
FOB Price:	15 ~ 18 / Kilogram (Negotiable) Get Latest Price
Place of Origin:	-
Price for Minimum Order:	15 per Kilogram
Minimum Order Quantity:	20 Kilogram
Packaging Detail:	20kg each set
Delivery Time:	three days
Supplying Ability:	10000 per Month
Payment Type:	T/T, L/C, D/A, D/P, Western Union
Product Group :	-