Hydro-cone crusher
Features:
Manifold crushing cavity.
High crushing
ratio.
Low operation cost.
hydraulic concrete
breaker,cone crusher
specification
hydraulic concrete breaker adopts
computer optimization designto speed up main shaft speed. The
unique crushing chamber replacesystem can quickly replace
components in crushing chamber to meetdifferent size requirement.
The friction disc design and rotation ofeccentric shaft bushing
around fix cone plus more reasonable
"labyrinthseal" system are unique features of HPC
series, which have moreadvantages like easier operation, larger
application scope, morereliable, more smooth functioning comparing
with spring and traditionalcone crusher. It is the most ideal
equipment for large stone crushingfactory and mining
industry.
Pay attention to
following factors which can influence the performance of
hydraulic concrete breaker
:
1. Crushing
cavity depends on feeding material size;
2. Distribute
material equally around crushing cavity;
3. Automatically
control system;
4. Discharge opening of cone crusher works
normally;
5. Belt conveyor model should match with the
maximum processing ability of the crusher;
6. Choose right
screen model for advance screening and closed
screening.
The following factor will effect the
capacity of hydraulic concrete breaker
:
1. The fine
particle with size less than that of feeding hole surpass the max.
Capacity of the crusher by the extent of *0%;
2. Sticky
materials mixed in the feeding;
3. No feeding
control;
4. Materials allocated improperly around the
crushing cavity;
5. The recommended power not
used;
6. Screening capacity not enough;
7.
Discharge opening not works properly;
8. Material too hard
or too elastic.
Actuating Device of hydraulic
concrete breaker
Both ends of
cone crusher actuating shaft are equipped with tapered roller
bearing, driven by a pair of heavy load bevel gear. Bearing seating
adopts skeleton-type seal ring to avoid lubricating oil
leaking.
Bearing and Sealing of
hydraulic concrete breaker
All cone
crushers have copper inner and outer sleeves (inner and outer are
both copper), a steel spherical seat and a copper spherical bearing
(copper sphere). Dust ring is floated by spring inside spherical
seat, adjusting the machine operation.
Hydraulic
Adjusting
Structure
All the
cone crushers contain hydraulic adjusting structure for adjusting
the size of discharging opening quickly.
Hydraulic
Cleaning
Structure
Hydraulic
cleaning structure, as standard, is composed by four cleaning oil
cylinders set on crusher complete's bottom board. It is recommended
that the distance of cleaning chamber should be
*5mm.
Hydraulic Power
Assembly
It is
used both in "hydraulic adjusting structure" and
"hydraulic cleaning
structure"
Releasing of Iron
Particles
Cone
crusher provides spring-type protection to release the iron after
testing.
Lubrication
System
Cone crusher adopts a
highly effective external lubrication system which includes oil
pump, oil box and pipeline. Cone crusher will be stopped
automatically when oil temperature is too high or flow rate of oil
is too slow. A heat exchanger is provided if it is neccessary for
heating or cooling lubricatant.
hydraulic concrete breaker
specification:
| Model | Cavity
(coarse/fine) | Discharge setting
min. (mm) | Feed opening
(mm) | Capacity
(t/h) | Power (kw) | Weight(t) |
| HP***0 | C | *3 | **0 | ******0 | **0 | *3 |
| F | 6 | *6 | *****0 |
| HP***0 | C | *3 | **5 | ******0 | **0 | *8 |
| F | 6 | *6 | *****0 |
| HP***5 | C | *3 | **0 | ******0 | **5 | *6 |
| F | 6 | **0 | ******0 |
| HP***0 | C | *3 | **0 | ******0 | **0 | *3 |
| F | 8 | **0 | ******0 |
