Hydraulic Variable Rake Guillotine Shear Series

ERMAK CNCHVR angle adjustable hydraulic guillotine shears are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed.

Machines could be programmed easily with the use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine calculates and adjusts blade gap adjustment, backgauge distance, cutting length and cutting angle automatically. Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets, the shortest stroke is used.
 

• Mono block, welded steel frame rigid to deflection moment and high tensile with ST*4 Al material.
• Fast and powerful back gauge with ***0mm distance, moving by ballscrewed shafts, with automatic swing away feature.
• Avoiding sheet sliding during cutting action, powerful hold downs with maximum performance.
• Roller bearings on the table to help placing sheets to machine easily,
• CYBELEC DNC *1 G cut Controller,
• Honed hydraulic cylinders and chrome coated pistons.
• High quality top and bottom blades,
• Bottom; 4
• Top: 2 cutting sides
• Hydraulic operated blade gap and angle adjusting system with CNC control,
• Bosch - Rexroth hydraulic system.
• High pressurized silent ATOS pump.
• Front support arms with ruler and flip-stop.
• Foot pedal available for single or continuous cutting.
• Cutting line illumination and shadow line,
• **0 mm throat depth.
• Side and rear guards.
• Automatic serial cutting, flying cut,
• Cnc controlled automatic angle adjustment stroke adjustment hydraulic Wade gap adjustment

• Pneumatic sheet support system.
• Angular front gauge.
• **0 mm throat depth.
• Oil coolant
• laser cutting line.
• Finger protective light curtain, |Caragory 4)
• Longer front arms or squaring arm,
• Automatic stacking system,
• Dynamic backgauge with acservo motors,
• XI, X2 backgauge fort he angular cutting,
• Stainles steel cutter 

CYBELEC DNC *0 G Controller

• Automatic calculation of blade gap. cutting angle and stroke depth according to programmed material and thickness,
• 5 pre-programmed material type,
• Stroke depth management by frequency distortion or potentiometer.
• Automatic back gauge re-adjustment according to the blade gap,
• Sequence repeat, sub-programs and chain-programming,
• Multi-processor designed using ASIC and SMD. This provides full entegration and high safety,
• Keyboard with ergonomie s.
• *5 x **0 mm Black-White LCD graphic screen (visible area|. **0 x **8 pixel automatic contrast adjustment,
• Internal SR/WI memory.
• FLASH memory, updating with RS**2 as an optional. 2 x RS**2 port (Optional),
• High speed (**0 Khz) N2X axis with PID regulator and programmable resolution,
• Inch/mm. TON/TONS conversion,
• *6 (*4 or 3? optional),
• *6 output |*4 or *2 optional).
• Easy cut page.
• Flying cut
• On CNCHVR. blade gap adjustment stroke adjustment and back gauge position is automatically adjusted from the DNC controller unit according to the sheet thickness (Standard)