Product Description

~Features:
1.Two-component,neutral curing,high modulus and high strengthcapacity,non-corrosive to metal,coated glass etc..
2.It has the advantage of low air permeability.
3.Good compatibility with other neutral silicone sealants.
4.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes; virtually unaffected by sunlight, rain, snow and ozone.
5.Remains flexible over a temperature range of **8°F(**0℃) to **2°F(**0℃).
6.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber ensuring a durable, flexible, watertight bond upon exposure to atmospheric moisture.

Main applications:  
Secondary seal and joint insulating glass.

Limitations:
1.Can not be used in structural glazing applications.
2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface.
3.Not for frost or wet surface.
4.Is not suitable for the place of continuous immersion or year-round moisture.
5.Surface temperature is not below 0℃ or above *0 ℃.
6.Can not ontact with strong acids or bases.
7.Cannot be used on joint which bearing structural strength or places of physical damage.
8.Hasnt performed adhesion and compatibility tests on project substrates and all accompanying accessories.

Typical properties:
These values are not intended for use in preparing specifications.

Test Method Property Unit Standard Result
GB/T ****7 (ISO ***0) Slump mm ≤3 0
GB/T ****7 (ISO ***8) Working time(after *0 min.) s ≤*0 2.3
GB/T ****7(ASTM D ***7) Tack free time h ≤3 1.3
GB/T **1.1 (ISO ***9 )*******7 Hardness Shore A *0～*0 *9
GB/T ****7 (ISO ***9) Tensile strength MPa ≥0.6 1.1
GB ****6 Adhesion failure % ≤*0 0
GB ****6 (ASTM C **2) Heat aging   
weight loss % ≤*0 4.6
chalking  Nil Nil
cracking  Nil Nil
*GB: Chinese National Standard

ASTM: American Society for Testing and Materials

ISO: International Standardization Organization
The GB testing method is equivalent or partly equivalent to that in the( )

Installation:
1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application.Using proper materials and  and cleaning procedures is vital for sealant adhesion.
2.Cleaning materials:clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required).
3.Cleaning procedures:Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again.
4.Primers:IG**0 insulating glass silicone sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated.

Emergent Treatment:
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for *5 minutes or turn to doctor for help immediately.

Shelf Life:
*2 months from the manufacture date stored in cool & dry place below *7 ℃.

Color:

Part A (base) of IG**0 insulating glass silicone sealant is availablein white, part B (curing agent) in black;Black color after mixing.

Packing/ Mix Ratio:

PackingA component:**5L,B component:*8.5L;A component:*8.5L,B component:**0ml*7.Mix Ratio by Volume  A:B = *0:1.

LIMITED WARRANTY INFORMATION PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customers tests toensure that Foshan Shunde Mimdy Sealant Co., Ltd.s products are safe, effective, and fully satisfactory for the intended end use.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD. DISCLAIMS LIABILITYFOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.