Product Description
This
instruction is supplied to the operators to have acquaintance with
PE series Jaw Crushers structure principles and manipulating
methods ，please read it carefully before you
manipulating.
Ⅰ、Purpose and Applied
field
Our Jaw
Crushers are ideally suitable for primary and secondary
crushing,with well-capacity and high-effenciency,they are widely
used for crushing various medium hard rocks and other ore materials
whose maximum pressure-withstanding is ***0
kilogramforce/cm3 and
they are mainly supplied to the departments like Geological coal
char、Mine、Metallurgy、Chemical Engineering、Construction Materials
etc.and the labs of junior college academies science and research
units.
Cone
crusher is suitable for crushing hard and mid-hard ores and rocks.
The features of this crusher are: reliable structure, high
productivity, easy adjustment, economic cost etc. Type of
crushing chamber depends on application of the ores. Standard type
(PYZ) applies to middle crushing; middle type ( PYD ) applies to
middle-fine crushing. Short-head type is suitable for fine
crushing.
Its
spring release system acts as an overload protection to allow the
tramp iron to pass without damaging the crushing chamber. The
sealing system uses double dry oil and water sealing to separate
the lubricating oil from stone dust to provide its reliable
operation. The crushing chamber has standard, medium and short head
types to fit the needs of medium crushing, medium-fine crushing and
fine crushing.
1.Exported
Standard hard disk
crusher
MS Exported Standard Lab Crusher with Competitive Price is
mainly used to crush all sorts of rocks or ores of middle hardness,
so its an important device in the laboratories of
metallurgic,geological,building material and chemical
industries.
2.Main
Features of hard disk
crusher
1) High
capacity,rational construction
2) High Universality and smooth
running
3) even discharging size
4) Simple structure and easy to
operate
5) Easy replacement of wear and spare
parts
6) low noise and less dust
3.Structure
of hard disk crusher
This machine is mainly composed with machine body, eccentric axis,
connection rod, jaw plate and regulating mechanism.V belt is used
to transfer the momentum to the connection rod to drive the
moveable jaw plate to crush materials. The size of discharge
material can be adjusted by hand wheel and
rail.
The machine body is made of cast iron and there is a hole on the
top to support eccentric axis and the front wall is installed with
fixed jaw plate and the rear wall is installed with regulating
screw; the two sides are installed with lining
plate.
The tapered roller bearing on both sides of the eccentric axis is
supported by the machine body and the two ends are installed with
belt pulley and flywheel.The two-taper roller bearing in the middle
is connected with connection rod.
The connection rod is made of nodular cast iron and the moveable
jaw plate is installed on the top; the under groove is used as
supporting point of regulating
mechanism.
The function of regulating mechanism is to regulate the size of
discharge material.It regulates and controls the size of discharge
material by rotating the small hand wheel to drive nut to move
relatively to regulating screw.One end of regulating mechanism is
supported on the connection board and the other end is supported on
the machine body through rail.
Jaw plates and are cast with high manganese steel that has perfect
abrasive resistance.
4.Technical
Parameters of hard disk
crusher
|
Model
|
PF**0**0
|
|
Size of material feeding
opening:(length*width)
|
**0**0
|
|
Max feeding size of material(mm)
|
*0
|
|
Size of discharge outlet(mm)
|
***0
|
|
Productivity(kg/h)
|
******0
|
|
Model of motor
|
Y*0S - 4
|
|
Rotational speed(r/min)
|
**0
|
|
Power(kw)
|
1.5
|
|
Overall size(mm)
|
**0×**0×**0
|
|
Weight(kg)
|
**0
|
Application
of hammer crusher:
Hammer
crusher is
developed for both dry and wet crushing of brittle, medium-hard
materials for the mining, cement, coal, metallurgic, construction
material, road building, and petroleum &chemical
industries.
Hammer
Crusher Features:
1) Simple structure
2) High reduction ratio
3) High efficiency
Working Principle
of hammer crusher:
The
motor drives the rotor rotate of the hammer crusher at a high speed
through the belt, and on the rotor there are series hammers, when
the material get into the working areas of hammers, they are
crushed by the rotating hammers of the hammer crusher with high
rotation speed, the products which a re crushed to meet the
required size can be discharged by the outlet and become the final
products, the large size products are brought back to the crushed
area by the hammers of the hammer crusher for being recrushed until
they reached the required size.
Structural drawing of hammer
crusher:
| Country: |
China |
| Model No: |
-
|
| FOB Price: |
(Negotiable)
Get Latest Price
|
| Place of Origin: |
Qingdao,China |
| Price for Minimum Order: |
- |
| Minimum Order Quantity: |
1 Set |
| Packaging Detail: |
as required |
| Delivery Time: |
30 days |
| Supplying Ability: |
- |
| Payment Type: |
- |
| Product Group : |
- |
