Product Description

1.
First clean the floating dust, gravel and other substances on the substrate, on a dry substrate, you can wet the substrate in advance, and then do the next construction after there is no bright water.
2.
Evenly stir k*1 waterproofing slurry, with a brush or roller on the waterproofing slurry, brush on the wall, brush evenly, do not miss brush not thick brush, generally painted two times waterproofing mortar needs to be vertical, so that the waterproof layer to form a tight protection...
3.
In the use of waterproofing slurry, if you need to use at intervals, you need to seal the original waterproofing slurry barrel cover, to maintain the best state of the slurry, convenient for subsequent use.
4.
Closed water test needs to be carried out after the waterproofing layer is completely dry and solid. Closed water test need to be closed full *4 hours