KITAPON is a complete range
of adhesive rear-projection foils, that are stuck ONLY WITH WATER, and not with chemical
or solvent adhesive. It can be stuck, then peeled off, then stuck
again, and again...
KITAPON is cost effective and eliminate the risks of traditional
adhesive projection screens (bubbles, specialist intervention for
mounting, wrong positioning of the screen...). If you need to
change the location, if the mounting surface was not clean enough,
or if there are still some little imperfections... just unpeel it
and do it again.
-KITAPON is cost effective: you can unstick it in seconds and use
it in another place, the material is never wasted, even if you move
the complete installation.
-KITAPON is easy to use for non professional people: you just need
a small "squeegee" and a spray of water, that's it ! Light and easy
to transport, it can be stored in a tube.
-KITAPON is a very flexible display friendly solution: when total
window display and product focus is necessary, simply peel off and
-And, KITAPON gives the brightest results in any light conditions
KITAPON can be use for digital signage, shop window
installation, and interactive or touch displays.
We have several KITAPON available versions:
A Premium high-contrast black projection film, for images with more
depth even with very high environmental light.
It is our most contrasted film, with a natural black background for
respecting original colors. Wide angled.
Uses: outdoor, shop-windows, digital signage, home cinema
A high-contrast dark grey projection film, for high impact in high
Almost as contrasted as the UX screen, but with less angle.
Uses: outdoor, shop-windows, digital signage
Contrasted grey projection film. It is the "all terrain" screen:
perfect balance between luminosity and contrast, wide angle,
Uses: shop window, fairs, exhibitions, museums
White projection film. Emitted light has an 97% rate of diffusion
on the screen superficy, which make DIFFUSION very suitable for
mounts with short range optical projectors. No hot spot.
Total respect of natural colors
Uses: interior installation, exhibitions, museums, architecture
Transparent projection film. Holographic foil with transparency
> 90%. No projection = almost total transparency. See-through
and holographic effect.
Uses: designed for special effect (pepper ghost, 3D...), and use in
controled ambient light.
We do not recommend it for daylight use in full sunlight.
White projection film. This is a rear projection film that includes
a reflective layer: the image can beseen on both sides of the
Uses: bars and restaurants, museums, exhibitions
Note: as image can be seen on both side, one is seen as a mirror
image. Be aware of possible rear-illumination of the screen by
ambient light in case of shop window use.
Light grey. An adhesive projection film for frontal projection.
Uses: board room, exhibitions, architecture