Product Description

EIE Laminar Air Flow Unit, is highly demanded among the clients owing to its high performance and longer working life. Brief Description : Body made of cold rolled sheet duly powder coated. Table made of S. S. **4, front door of clear acrylic, UV lamps will be Phillips/equal imported make. Other standard accessories such as Manometer, gas inlet, castor wheels, illumination, additional power point are included in the price. Working Size 2 X 2 X 2 3 X 2 X 2 4 X 2 X 2 6 X 2 X 2 Note : The Laminar Flow Cabinet can be made of S. S. Instead of mild steel at an extra cost . Price on request. EIE****2 : Horizontal Direction of flow : Horizontal Cleanliness : CLASS **0 Velocity : *0 FPM +/- *0% HEPA FILTER : Size and quantity will depend on the size selected Particle retention : Above 0.3 micron Blower Assembly : consists of 0.5 HP single phase,***0 RPM motor Noise level : *5 decibel +/- 5% Rate of air flow : 0.*0 to 0.*5 M/Sec (*0 FPM) Vibration level : < 2.5 micron HEPA Filter : Particle retention will be 0.3 micron at rated velocity, Pressure drop will be *3 mm WG, Efficiency *9.*7%. Protected with specially perforated SS grill at the downstream side. Pre-Filter : size will depend on the size selected. Particle retention down to *5 micron at rated velocity, Pressure drop 6 mm WG, Efficiency *0 % Protected with specially perforated SS grill. Blower Assembly : consists of a 1/4 HP,***0 RPM, single phase Motor with double end shaft and a pair of aluminum centrifugal type impeller directly coupled on both ends of the motor & encased within an MS blower housing. Material of Construction : The complete LAMINAR AIR FLOW BENCH will be fabricated by using Powder coated CRC sheet with square pipes. Front door made of 6 mm clear acrylic(polycarbonate at extra cost) with double folding facility. Working table will be of complete stainless steel. Ultra violet lamp of 3 feet *0 watts-Philips- Holland make will be provided. Standard Accessories : The equipment will be provided with *0 watt daylight lamps with diffusers, Gas cock, castor wheels, pressure differential manometer, additional 5 amps power point, side screens made of 6 mm clear acrylic. Working Size: 2 X 2 X 2 / 3 X 2 X 2 / 4 X 2 X 2 / 6 X 2 X 2 Pressure Differential Manometer will indicate the pressure behind the HEPA FILTER and after few years, the pressure will be more because of accumulation of dusts at the upstream side. Once the pressure level indicates above *2 mm WG in the manometer or the velocity at the downstream side falls below *0 feet per minute, the filters may be replaced. The velocity can be monitored by using external anemometer. Note : The Laminar Flow Cabinet can be made of S. S. Instead of mild steel at an extra cost . Price on request.