Product Description

Model LDM***0 outside diameter measuring range 0.2 to *5mm, Large diameter laser outside diameter measuring instrument

Model LDM***0 Laser diameter measuring gaugeis the high-accuracy installment that uses the laser scan to carry on the no-contacts on-line measurement. It is mainly used in measuring of outer diameter and adjusting the extruder screw or traction speed, to control the outside diameter. It is applicable to measure and control the diameter of metal wires, glass, pipes, wire and cable, etc.
It can also be applied to the outer diameter of workpiece and size measurements.

1.  Technical parameters
Model        Measuring Range   Resolution    Accuracy
LDM***0         0.2 - *5mm            0.**1        0.*2mm
 
2.  The performance indicators
Measurement: Laser scanning
Laser: Visible red semiconductor laser
Laser output power: <2mW
Operating voltage: ~ **0V plus/minus *5%  *0 - *0Hz
Operating temperature: **0 ~ *0 Degrees Celsius
Humidity: <*5% RH
Work mode: continuous
Power consumption: <*0W
Dimensions: 
LDM**0 Gauge head: **0mm(length) * *0mm(wide) * **0mm(high)
Stand: **0mm * **0mm * (*******0)mm
Height of central measuring position: *******0mm

3.  Characteristics
1).  Can be connected PLC, industrial computer.
2).  RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect.
3).  Can be equipped remote controller DDC*3, DDC*5, on the extruder and automatic feedback control to control the tolerance, improve product quality, reducing consumption.

4.  Display Controller (Model:DDC*3, DDC*5)
1).  It be used to remote display and control.
2).  Applicable to DC motors, VVVF motor.
3).  The controller can control the speed of extruder or the tractor according to the diameter tolerance.
4).  Can simultaneously measure the outside diameter.
Signal distance:  More than **0m
Output voltage: plus/minus *0V
External dimensions:**4mm * *5mm * **0mm (Model:DDC*3)
                                      **0mm * **0mm * **0mm (Model:DDC*5)