Product Description
Model
Number:BLT5W**-BB***-AC*6
LED Lamp
Bead:**4PCS
/SMD***0
Contour
Dimension: diameter *3mm,
Length:***0mm
Lamp
Body:aluminium
alloy+PC
Viewing
Angle:
**0°
Power
Consumption:
8W
Input Voltage: AC*6V/**0V/*0HZ***0HZ
Color
Temperature:***0K(white
light)
Luminous
Intensity:**0
lumens
Compare with
fluorescent tube:*8W
Efficiency:
greater than *0%
Performance
Factor: greater than
0.*5
Protection
Grade:IP*0
Continuous
Working : ****0 hours(*5
degree ), ****0 hours(0~-*0
degree)
Attenuation
Ratio:1% ***0
hours(*5 degree)
Working
Life: greater than
****0 hours
The
series of the JM machine tool LED lights is designed for the small
and
medium size machine tool,
numerical control machine, milling and drilling machine, modular
machine tool and other equipments lighting by our company .Our LED
lights is application to Alternating Current*2v/
*4v/*6v/**0v.
The
light cover adopts the fireproofing material, and the advantage is
waterproof, anti-explosion and weatherproof. The integral structure
of the light body is heat emission ,not only the surface look nice
but also the light working temperature is down to the best
point.Because of the high quality and the advanced circuit design
the light has excellent isolation, inflaming retarding, impact
resistance and strong corrosion prevention advantages, and
guarantee the light can work uninterruptedly in the machine tool
working enviroment.The LED machine tool light can widely use
in the machine tool working table and the workshop with the light
distribute uniformity ,the lighting effect is favorable and
long working life.
According to the low voltage, moist, safety and
anti-explosion special enviroment, our company design and produce
the series of LED machine tool lamps by ourselves.
According to the
power supply voltage, it can divide intoAC*2V/AC*4V
/AC*6V/ AC**0V.
According to
the connector, it can divide into E*7 screw joint corn-type machine
tool LED lamp, E*7 screw joint horizontal plug machine tool lamp,
E*7 screw joint flying disk type machine tool LED light, tube –type
machine tool LED lamp.
Every series of the lamp has
warm light (***0k) and white light(***0k).
Advantages of the machine
tool LED lamps:
1.The
outer cover is made of low
shrinkage not saturated polyester glass fiber reinforced
plastic, with the nice appearance, light weight, open and
close flexibly, use safety simpler reliably, insulation,
antiflaming, impact resistance and antiseptic
advantages.
2.The
light transmitting cover adopt the cold resistant PC material ,on
the basic of the original cover we introduce the newest and
microthermal plasticizer and inhibitor, avoided easy breakage
problem, with impact resistance and high light transmittance
advantages.
3.Long
working life: The lamp body adopt the heat dissipation over-all
structure, so the working temperature is down to the best point
.The working life is ****0 hours , and it can non-stop work more
than ****0 hours.
4.
High efficient and energy-saving: Compare with the fluorescent lamp
and common energy –saving lamp, it can save electricity *0—*0% and
******0%.
5.
Instant-on: response time is **0ns,open and close frequently does
not impact the working life,*0 degree below also can instant
start.
6.
Non-pollution: all the material adopts the non-pollution,
non-mercury and non-lead.
7.
Anti-explosion: The over-all structure adopt the safe design and
against breakage.
8.
Standard lamp socket: E*7 lamp sockets, easy replacement, replace
the fluorescent lamp and common energy –saving lamp
directly.
9. Adopt the Nichia LED SMD
bead, high lighting effect, low brightness decay.
Application
area:
Widely
used for the small and medium size numerical control machine
tool, modular machine
tool, machining center and
general-purpose machine tool,it is suitable for the indoor lighting
of the enclosed numerical control machine tool ,and the operating
lighting of the armarium, vehicle repair,ship repair,equipment
maintenance
Country: |
China |
Model No: |
BLT5W08-BB-06-AC36
|
FOB Price: |
1 ~ 200 / Piece ( Negotiable ) (Negotiable)
Get Latest Price
|
Place of Origin: |
china |
Price for Minimum Order: |
1 per Piece |
Minimum Order Quantity: |
200 Piece |
Packaging Detail: |
strong cartonbox with PE foam |
Delivery Time: |
3days to 15days |
Supplying Ability: |
500000 Piece per Month |
Payment Type: |
T/T, L/C, D/A, D/P, Western Union, Money Gram, PayPal |
Product Group : |
LED Machine Tool Lighting Lamp
|