Product Description
lubricant oil recycle
machine
Because
the waste oil contain too much contamination, including
non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal
hydronium, impurities, metal particles, asphaltene and colloid etc.
and due to the traditional technology only can refine the waste oil
to base oil, can't use directly, so our company is researching the
new technology about distilling equipment, which can distill all
kinds of waste oil into clean oil, easy to operation, and the lower
operation cost.
1.Working
principle of lubricant oil recycle machine
This
equipment adopt physicochemical actions to polymerize, passivate,
absorb and eliminate impurities and harmful contamination. We
research a new chemical alkaline complex catalyst, which can
restore and regeneration the Waste oil to clean oil, save the
component of the oil.
2.
Advantage of lubricant oil recycle machine
It's easy
to produce waste residue and bad smelling by traditional vitriol
distilling, which will bring potential secondary pollution,
moreover, it's easy to change the color to black and produce the
odor due to the recycled oil react with the oxygen. But after we
use the alkaline complex catalyst refines the oil, the recycled oil
haven't change the color and haven't create the odor. What's more
important, you can use the resid to be as the fuel to heating the
oil, without any pollution. And the equipment is easy to operate,
only **2 workers can control the equipment.
3. Main
components of lubricant oil recycle machine
a.
Catalyst system: Catalyst Reactor, blender;
b..
Chemistry treatment system: Chemistry reactor, blender,oil
pump
c. Heating
distilling system: distilling tower, distilling kettle, heater,
circle pump;
d. Cooling
system: refrigerating equipment, water pump, water tank, cooler
I,cooler II, Condenser;
e. Vacuum
system: Vacuum water receiver, vacuum pump, vacuum
cooler
f.
Degasification system: vacuum exhauster, exhaust fan,
degasification plant, water pump,
radiator,deodorizer.
g. oil
storage system: distilling storage tank
h. Control
system: all kinds of gauge( vacuum gauge, pressure gauge etc.) and
electricity controller tank
4. Working
Principle of lubricant oil recycle machine
A proposal
for processing waste lube oil and industrial oils, using high
vacuum distillation technology is presented here. The various steps
involved in the projects are given below.
Step1: The
waste oil is pre-treated and then send to chemical processing
kettle and react with catalyst.
Step2:
This waste oil is approx **0 degree at 0.**8Mpa to have water and
some light fractions separated.
Step3: The
temperature is keep rising up to ******0degree at **0Pa , the
lighter fractions such as gasoline, diesel are distilled and cooled
and then stored in diesel receiving tank.
Step4: The
undistilled waste oil subjected to high vacuum, medium temperature
in the heated distillation plant, the light base oil fraction is
distilled and cooled and then collected in the light base oil tank(
above **0degree and at a pressure of **0Pa). The distilled oil will
have a viscosity of higher than SN**0 at
ambient.
Step 5:
The undistilled waste oil subjected to high vacuum, high
temperature in distillation plant, the heavy base oil fraction is
distilled and cooled and then collected in the base oil tank (
above **0degree and at a pressure of **0Pa). Distilled oil
approximately higher than SN**0 in viscosity).
Step6: The
distilled oils are clean oil generally no need further treatment,
they are going to be blended with additives to get finished oils
for the automotive and industrial applications.
Step7: The
final residue is semi solid at ambient and can be processed for
manufacturing asphalt, finished to make off-speck heavy fuel oil or
to make greases for slow moving equipment.
5.
Features
1. Easy to
operate, low operation cost
2.
Environmentally friendly, without secondary pollution.
3. The equipment
can recycle gasoline oil, diesel oil, engine oil, rubber oil and
other lubricant oil to clean oil.
4. High quality
refined oil, no any discoloration caused by oxidation, no any bad
smelling.
5. Low cost
contain:
1) only need the
catalyst chemical, the cost is less than US$*0 to refine one ton
waste oil.
2) Heat
consumption: **5 kcal per ton waste oil
3) Power
consumption: *0Kwh to recycle 1 ton waste oil
6. High degree
of automation.
The detail of recycled light oil and heavy oil
|
item
|
Heavy base lube oil
|
Light base lube oil
|
appearance
|
lucidity
|
lucidity
|
color ≤
|
1.5
|
1
|
Viscosity(*0degree)mm2/s
|
*9.*7
|
*6.*6
|
Viscosity index ≥
|
*6
|
*5
|
anti- oxidation **0degree,
min ≥
|
**0
|
**0
|
de-emulsification, 5degree,
min
|
5min
|
5min
|
Flash point (opening)degee ≥
|
**8
|
**4
|
Country: |
China |
Model No: |
DIR vacuum distillation
|
FOB Price: |
( Negotiable ) (Negotiable)
Get Latest Price
|
Place of Origin: |
China |
Price for Minimum Order: |
- |
Minimum Order Quantity: |
1 Set |
Packaging Detail: |
packed in strong wooden case, it is suitable for long distance transport |
Delivery Time: |
40 workdays |
Supplying Ability: |
1 Set per Year |
Payment Type: |
L/C, T/T |
Product Group : |
engine oil recycling plant
|