Product Description
Our material handling air showers (tower flow) are enclosed
chambers ideally installed in front of a clean room to prevent the
entry of contaminating particles within the working area. The Clean
room air showers are specifically designed for the elimination of
surface particles from the materials, clothes and skin surfaces of
the personnel, prior to entering a clean room or controlled
environment chamber. Our material handling air showers find
widespread use in semiconductor manufacturing units, animal
research facilities, pharmaceutical production units, micro
fabrication industry and in basic and applied research
laboratories.
Working Principle of Material Handling Air Showers
(Tower Flow)
Both the doors of our material handling Tower flow air showers
are interlocked and magnetically operated. They are permanently
energized and open instantly when the open door push is
pressed. Once the user enters the air shower cubicle, he/she can
start the shower cycle from the inside. The shower cycle is
programmable and can be set as per the requirements of the
industry. Both the doors of the unit remain locked till the shower
cycle continues, to prevent the entry of external contaminants
while the air shower is operational. Once the Tower flow air shower
cycle is completed, the personnel can exit through the exit door.
The one-way mode of operation allows the user to enter the air
shower cubicle, but he/she cannot exit through the entrance door,
therefore controlling the traffic patterns into and out of the
controlled environment chamber. Moreover, the pre-purge function of
our modular air showers allows the unit to self-clean in a power-on
mode. The pre-purge time is also programmable and can be set
between **3 minutes. Air shower principle is based on subjecting
the personnel through adequate velocity of clean air coming through
a pre filter assembly.
The air present in the air shower cubicle is continuously
circulated through the filter assembly, comprising of pre-filters
and HEPA filters. The filter assembly physically entraps the
contaminating particles and removes them from the air circulation.
The efficient fans and blowers blow the filtered air into the air
shower cubicle through adjustable nozzles at appropriate face
velocities. The turbulent air streams produce enough shearing
effect to loosen the dust particles and other particulate matters
from the external surfaces, causing their wash down with the air
stream. The air shower cubicle is maintained at a slightly higher
pressure as compared to the outside to prevent the contaminating
particles from entering the cubicle when the unit is at rest.
Air Shower specifications are in accordance with the US
Federal Standards.
Product Description
Filter assembly
Our quality control air showers are equipped with top mounted
pre-filters and HEPA filters for the removal of particulate matters
as small as 0.3 microns in size with a filtration efficiency of
more than *9.*7%. The pre-filters can effectively remove around *5%
of the particulate matters, therefore reducing the contaminant load
on the HEPA filters and increasing their efficiency and life span.
The filtered air is released through adjustable nozzles, arranged
in a uniform pattern on the walls and ceilings. The pre-filter unit
is fully washable and is made up of non-woven synthetic polyester,
whereas the easy to clean HEPA filters are made up of glass pleated
non-woven fabric filter.
Control Unit
The unit is controlled through a programmable solid state
circuit control system, located at the junction box of the unit.
The junction box is a tamper proof enclosure that houses emergency
setting s for switching off of the equipment in response to
audio visual alarms. The control unit houses the operation timer
and nozzle adjustment s. Our air showers use microprocessor
based controllers for various set parameters and for the detection
of any errors or deviations from the set parameters.
Construction Details
Our air showers use heavy industrial grade mica clad wooden
boards and stainless steel (SS***4, SS***6) as construction
materials. The internal surfaces are laminated and available in
attractive finishes. The unit is provided with interlocked and
magnetically operated doors on either side of the air shower
cubicle. The doors are made of aluminium panels and have clear view
glass/acrylic windows for increased visibility. The compartment
access panels are made of aluminium panel and are hinged for ease
of operation. Air shower room is a closed cubicle with adjustable
nozzles air showers designed for clean room applications.
Motor And Blower Assembly
The motor and blower motors are statically and dynamically
balanced and have permanently lubricated bearings for long lasting
and trouble free operation. They bear ISI marking and are rated at
1/5 HP. The blower access panel is located at the side of the air
shower unit.
Illumination
Our air showers use top mounted fluorescent lights for
adequate illumination of the shower cubicle. The fluorescent lights
panel is concealed at the upper portion of the unit and provides a
minimum illumination of **0 lux. The lighting arrangement conforms
to the US Federal standards.
Key Features
- Versatile usage
- Ergonomic design
- Reduced vibration levels
- Low noise level < *0 db
- Programmable operation
- Calibration and protocol
documentation
- Conforms to the US Federal
Standards
Operating Features
- Programmable mode of operation,
pre-purge and shower time
- Floor matting operated switch for
sequential operation of the air shower
- Fully washable pre-filters capable
of removing around *5% of particulate matters
- Highly efficient HEPA filters with
around *9.*9% filtration efficiency for removing particles as small
as 0.3 microns and larger.
- Both the doors are Interlocked and
magnetically operated to prevent them from opening at the same
time
- The auto reset feature unlocks the
doors to prevent accidental lockouts
- The reset default function resets
the program settings to default values
- Microprocessor based controls for
the set parameters’, detection of errors and their display
- The clean room/grey room settings
can be reversed via microprocessor based controllers, eliminating
the need for physical reorientation of the unit.
- Permanently lubricated direct drive
centrifugal motors and efficient blowers capable of maintaining
appropriate face velocities of the air (***0 ft/min + *0 feet)
- Multidirectional air flow for better
reachability
- Emergency override s on both
sides of the air shower to release the doors even when the air
shower cycle has not completed
- Indicator lights for open doors
- LED indicators for interlock
and shower sequence
- An administrator PIN can be set to
prevent unauthorized access to the air shower settings
- A maintenance function
operates the fan continuously for service checks and air
velocity measurements
Technical Specifications
Constructions
|
Industrial grade mica clad wooden
board/MS Sheet/Stainless Steel
|
Internal Work
Space
|
Customized
|
Face velocity
|
***0 ft/min + *0 feet
|
Air Flow
|
Multi Directional
|
Air Flow
Control
|
Solid State Control Unit
|
Operation Time
(Adjustable)
|
**9,**0 seconds
|
Pre Filter
|
Washable pre-filter unit (Non
Woven-Synthetic Polyester)
|
HEPA Filters
|
Glass pleated non woven fabric
filter having *9.*9% efficiency 0.3 micron particle size.
|
Blower
Assemblies
|
Centrifugal lubricated bearing type
ISI marked assembly
|
Illumination
|
Fluorescent light illumination
greater than **0 lux
|
Noise level
|
Noise level less than *0 db
|
Add on features
|
Sequential feature operation by door
mat magnetic switch.
|
Power
Requirements
|
Model Specific
|
Nominal voltage
|
******0 Volts, *0 Hz Single
Phase
|
Frequency
|
*0/*0
|
Standard Models
Model No.
|
Size (WXDXH)
|
ACM***1
|
***0X***0X***0
|
ACM- **2
|
***0X***0X***0
|
ACM- **3
|
***0X***0X***0
|
Country: |
India |
Model No: |
ACM-330TF
|
FOB Price: |
4000 ~ 6500 / Unit (Negotiable)
Get Latest Price
|
Place of Origin: |
New Delhi |
Price for Minimum Order: |
4000 per Unit |
Minimum Order Quantity: |
1 Unit |
Packaging Detail: |
as per customer requirement |
Delivery Time: |
4 to 5 week |
Supplying Ability: |
50 Unit per Week |
Payment Type: |
L/C, T/T |
Product Group : |
Air Showers
|