Product Description

Technical Specification:

1. Act as a PROFIBUS DP slave at the side of PROFIBUS DP, while Modbus master, Modbus slave and Universal mode can be selected at serial side and serial interface can be selected RS**2, RS**5 or RS**2. The mapping of PROFIBUS DP and Modbus communication data area can achieve transparent communication of PROFIBUS and Modbus;
2. Serial: RS**5, RS**2, RS**2, half-duplex. Baud rate: **0, **0, ***0, ***0, ***0, *9.2 K, *8.4K, *7.6K and **5.2Kbps can be selected. Parity check mode: None, Odd Even, Mark and space can be selected;
3. As a Modbus master supports *1H, *2H, *3H, *4H, *5H, *6H, 0FH and *0H function codes. It can be configured up to *8 Modbus commands. *3H and *4H support "Word / Byte mapping". Through the high-byte or low-byte mapping of the registers can effectively utilize PROFIBUS DP -byte; Support monitoring status of Modbus slave; Support clearing data or keep the last data when -data is abnormal; Support re-transmitting data when response is timeout;
4. As a Modbus slave supports *3H, *4H, *6H and *0H function codes;
5. Support the control mode of character timeout and character number in universal mode, and have the function of sending automatically;
6. DP/V0 PROFIBUS DP communication capability, in accordance with EN****0;
7. As a PROFIBUS DP slave, baud rate is self-adaptive, and the maximum baud rate is *2Mbps;
8. PROFIBUS DP -byte and output-byte number can be freely set and the maximum and output bytes are:
         Max Input bytes ≤**4 Bytes
         Max Output bytes ≤**4 Bytes
         Max Input Bytes + Output Bytes ≤**8Bytes
9. Support clearing data or keep the last data when -data is abnormal;
10. Update firmware function;
11. Power: *4VDC (*1V~*0V), *0mA;
12. Working circumstance temperature: **0~*0℃, Humidity: *5%;
13. External dimensions:（Width）*0mm*（Height）**5mm*（Depth)**0mm;
14. Installation: *5mm DIN RAIL;
15. Protection Level: IP*0;
16. Test standard: In accordance with EMC test standard.