Product Description
DW solar panel is made up of solar
cells with high efficiency and high transmission rate, low iron
tempered glass, anti-aging EVA, high flame resistant TPT/BBT and
anodized aluminum alloy. Its merits: high efficiency, long life,
easy installation, high wind-resistant, etc.
Manufactured strictly to IEC****5,DW solar
panel has pass the examination in authority test center, and it is
now widely used in household solar power systems, PV stations,
communication stations, and in the field of petrol, ocean,
meteorological, traffic, buildings, etc
1. Climate Condition:
Install the PV panel in the following conditions:
Ambient temperature:**0℃ - **0℃ Operating temperature:**0℃ - **0℃
Snow Load Capacity: below ***0Pa Wind Load Capacity: below ***0Pa
Water resistance: don’t install the PV panel in a location where it
would be immersed in water or continually exposed to water from
sprinkler or fountain, etc. Corrosion resistance: except for
corrosive salt area and sulfurous area.
2. Orientation:
Install the PV panels facing south (in Northern Hemisphere) or
to north (in Southern Hemisphere).Incorrect orientation will result
in loss of power output.
PV panels connected in series should be installed at same
orientation and angle. Different orientation or angle may cause
loss of output power due to the different radiation on the
panels.
Install the PV panels as free as possible from shading.
Shading causes loss of output, even though the bypass diodes fitted
in PV panels by manufactory can minimize such loss
3. Mounting and notes:
Fasten the PV panels to the shelves with spring washers and
flat washers.
Put the PV panels in a proper grounding way, which should be
according to the mounting structures and environment.
Note: Do not install the PV panels near naked flame or
flammable materials.
Mounting structure should withstand environment. Select proper
material and corrosive treatment.
Use appropriate methods to mount PV panels. Avoid any damages
from falling.
Do not disassemble, bend, walk on the panels, please do not
impact the panels by sharp objects.
4. Caution
The PV panel has a pair of waterproof connectors (positive and
negative). For the connection in series, please connect the
positive (+) connector of 1st PV panel to the negative (-)
connector of the next panel.
Connect the output cables with load equipments
correctly.
Please do not connect the panel’s positive connector to its
negative one directly. It will be short circuit.
Make sure there is no gap between the connector and
insulator.
If the gap exists, a fire or an electrical shock may
occur.
Check the mounting structure. Tighten the loosen components again,
if required.
Check the connections of cables, grounding cable connectors
frequently.
Clean the face of the panels regularly with soft cloth
frequently.
Replacing panels should be the same kind and type
Don’t touch live parts of cables and connectors. Use
appropriate safety equipments when touching them.(Insulated tools,
insulating gloves, etc)
Covert the front surface of PV panel by an opaque cloth or
other materials when repairing under sunlight, the PV panels will
generate high voltage and it will be dangerous.
The quality assurance time of the PV panel is 3 years. The power
declines not exceed *0% in *0 years and *0% in *5 years.
Country: |
China |
Model No: |
Monocrystalline standard panels
|
FOB Price: |
(Negotiable)
Get Latest Price
|
Place of Origin: |
- |
Price for Minimum Order: |
- |
Minimum Order Quantity: |
- |
Packaging Detail: |
- |
Delivery Time: |
- |
Supplying Ability: |
- |
Payment Type: |
- |
Product Group : |
- |