Product Description

Nachi ***3 ZZE deep groove ball bearing *7**0**2mm

Single-Row Deep Groove Ball Bearings

• Pressed Steel Cages

  Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.

  In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.

  For big deep groove ball bearings, machined brass cages are used.

  Machined cages are also used for high speed applications.

  Sealing：
  Open bearings are suitable for high to very high speeds. 
  Deep groove ball bearings with the suffix 2Z have gap seals on both sides and are suitable for high speeds. 
  Bearings with the suffix 2RSR have lip seals on both sides made from nitrile butadiene rubber NBR and are suitable for moderate speeds. 
  By agreement, we can supply bearings with non-contact BRS seals on both sides (suffix 2BRS). These bearings have favourable frictional behaviour equivalent to that of bearings with Z seals . If the inner ring is stationary and the outer ring rotates, the lubricant loss is less than that in bearings with Z seals .

   

  Double row deep groove ball bearings
  Despcriptions：Double row deep groove ball bearings correspond in their structure and function to a pair of single row deep groove ball bearings. They are designed for high to very high speeds and are used where the load carrying capacity of single row deep groove ball bearings is not sufficient. 
  Double row deep groove ball bearings are wider than single row deep groove ball bearings of the same bore and outside diameter but have a significantly higher load carrying capacity.
  Sealing：Double row deep groove ball bearings are not sealed.
  
  Brg No. / Unit No. / Housing No.    Bearing Type    Detail
  ***3    Deep-groove Ball Bearing    Open
  ***3ZE    Deep-groove Ball Bearing    One shield
  ***3ZZE    Deep-groove Ball Bearing    Two shields
  ***3NSE9    Deep-groove Ball Bearing    One contact seal
  *****2NSE9    Deep-groove Ball Bearing    Two contact seals
  ***3NKE9    Deep-groove Ball Bearing    One non-contact seal
  *****2NKE9    Deep-groove Ball Bearing    Two non-contact seals
  ***3    Deep-groove Ball Bearing    Two non-contact seals
  ***3N    Deep-groove Ball Bearing    Snap Ring Groove only
  ***3NR    Deep-groove Ball Bearing    Snap Ring
  ***3ZENR    Deep-groove Ball Bearing    Snap Ring and Shield
  ***3N    Deep-groove Ball Bearing    Snap Ring and Shield