Product Description

 The maximum suction capacity of ZHONGNI 2BE1 Vacuum pump/compressor can reach *2,**0m3/h. The lowest suction pressure can reach *3mbar A. When it is used as a compressor, its exit pressure can reach 0.*5Mpa.A. Furthermore, top discharge and horizontal discharge are optional so it can be easily installed.

Reliable performance.
Reliable design tested by practices.

The maximum suction capacity of ZHONGNI 2BE1 Vacuum pump/compressor can reach *2,**0m3/h. The lowest suction pressure can reach *3mbar A. When it is used as a compressor, its exit pressure can reach 0.*5Mpa.A.

Owing to only one rotating part (impeller) and no direct friction of metals so abrasion is avoided even if it has run for many years.

ZHONGNI adsorbs others advantages and must not let you down.

Unique design

All ZHONGNI liquor pumps are designed according to flexible discharge valve and so they realize optimal efficiency. Whether *0KW power or **0KW power is need in your work spot, ZHONGNI liquor pumps always perform well. Patented design of flexible vent can make over-pressed in vacuum application be avoided. By self-regulation of discharge area, energy consumption is reduced. So it reaches optimal performance. Flexible PTFE valve board covers vent holes at outside of circle plate and is positioned by stainless steel board of its other side. This valve board changes its bend degree along with entrance pressure change. So target fluid can be discharged out of pump when its pressure reaches entrance pressure.

Features:

Simple structure: Single level, single action, axle-direction suction and discharge. Convenient maintenance.
Self-regulation: Vent with flexible valve board can self-regulate discharge-direction and make pump run with high efficiency at different suction pressures.
Wide pump scope: Limit absolute pressure can reach *3hPa.
Good adaptation: When used in corrosion sites, its flow passage components can be made by different materials.
Reasonable design: Gas-etching valve can be added to prevent gas-etching damage in higher vacuum condition. Spraying device can be added to pump high temperature gas.

After two times development, its structure is improved, operation is more reliable and performance is more stable.
■High reliability, easy maintenance.
■Low cost operation.
■Low noise.
■Even if it works without work fluid, its body won’t be damaged.
■Special material can be used to some corrosive fluid.
■We can provide close-circulation whole unit.

All specifications are all ready. Many materials are optional.

All kinds of models of ZHONGNI 2BE1 series are all ready. Their suction capacity can reach *2,**0m3/h. Furthermore, top discharge and horizontal discharge are optional so it can be easily installed.

2BE1 series can be made by many materials that include many kinds of stainless steels. We can supply many kinds of products combinations according to your demand, such as:
■Pump head.
■Whole pump, It includes suction gas connection pipe, gas-water separation device and flow pipe sets.
■Vacuum pump unit that includes electromotor and foundation.
■Whole unit including all accessories in close-circulation system.
■Two-levels or multi-levels vacuum system when entrance pressure is lower than *3mbar (absolute pressure).

Applications of 2BE1 series are very wide.

Electricity industry: Steam-cooling device, Vacuum pumping, Negative pressure dedust.
Petroleum and chemical engineering: Vacuum distillation, Vacuum crystalization.
Oil extraction industry: Deoxidation of injected water.
Cigarette industry: Vacuum transmission.
Gases separation: Pressure swing adsorption.
Coal industry: Coal-washing, dewatering, gas drainage.
Metal and mining: Mine processing, dewatering.
Food industry: Vacuum transmission, vacuum dryness.
Aviation test: High altitude simulation.

Other: Desulfurizeation device in flying dust procession, Compression of flammable and bursting gases like ethyne, Compression of ozone, Paper pulp and paper-making, Soil purifying, Extrusion and vacuum molding, dipping, extraction, etc.