Product Description

Product introduction:
AM - **0 is a common oily glass heat insulation paint, is normal dry coating paint, its characteristic is only 3 h film hardness, with the current water hardness is the same as the glass coating, per liter coating construction area is much bigger than curtain coating of water-based paint, therefore, relatively low cost, can be coated to make the inside of the hollow energy-saving glass or used for glass surface of the coating hardness requirement is not high. In addition to the hardness of the paint, other performance indicators are similar to AMS***0.

Main performance parameters:

The index name

The performance parameters

appearance

Blue liquid (single component)

The main ingredients

Nanometer insulating medium

Infrared barrier

*5% or higher

PH

7.0 + / - 0.5

The proportion of

0. 9 g/cm3

Visible light transmittance

*0% or higher

Uv barrier

*9% or higher

The temperature difference of the sunburned is reduced

****2 ℃

hardness

3 h.

adhesion

Level 0

Noise is reduced

****0 db

The thickness of the coating

4 to 5 microns

Membrane service life

*0 years

The construction area of

*0 m2 / L

Application area:

Used for building glass energy-saving renovation, reduce energy consumption.

2. Used for building glass, solar glass, glass curtain wall, high-end hotels, hotels, office buildings, private houses and exhibition halls to improve comfort and energy efficiency.

3. Glass insulation and uv protection for vehicles, trains, planes, ships, etc. to improve comfort and energy-saving efficiency

4. For indoor glass that needs to be blocked and screened from ultraviolet rays.

Method of use;

Clean the glass before construction and dry the surface without water before construction.

2. Prepare the sponge scratching tool and dipping tank, and pour the paint into the clean dipping tank. Dip the paint into the tank and scrape it down for construction.

Matters needing attention:

1. Selection of construction surface:

Single glass: both indoor and outdoor.

Double glazing should be done outside.

2. Transportation preservation method:

The product should be kept in the shade as much as possible.

The ambient temperature is from *5 to *5 degrees for three months.

The ambient temperature is from 5 to *5 degrees for 6 months

3. Applicable base material:

Transparent glass, transparent acrylic, transparent PET, transparent PP

When you use it, protect it from the mouth and eyes

Packing specification;

1/2/*0 L