Product Description

One Piece Tanks Decca offer a vast range of standard and metric sizes of One Piece tanks built and fully tested to all relevant world wide standards. - Will not corrode - Longer life - Normal fittings can be used - Lightweight & extremely strong Hygienic, environmentally friendly Complies to Byelaw *0 Regulations for potable wholesome water. Construction All Deccatanks are manufactured from top quality glass fibre/impregnated with polyester resin. All materials are WRAS & WRC approved. Based on the size of the unit under construction, integral treated timber reinforcements are encapsulated within the laminate. Units have a clean, smooth internal finish. 1. Base Supports Tanks should be situated on a continuous solid base ***** marine plywood, TG board, concrete and not rely on cross bracing alone. 2. Manways & Inspection Manways are bolted & vented which are in a standard size of: **0 x **0mm. They can be alternatively supplied hinged as a Deluxe Manway Inspection hatches **0 x **0mm are supplied standard with tank(s) holding over ***0 litres. 3. Raised Ball Valve Chamber Standard Ball Valve Chambers are supplied with a reinforced Ball Valve Area(s).These chambers can be preinsulated. Connection holes may be cut with conventional tools. Holes must be a snug fit. 4. Overflow screens Each tank is supplied with a DECCAscreen overflow to (BS ***0) whilst tanks supplied to the requirements of Byelaw *0 are complete with an additional *2mm early warning screen having a 0.*5mm micromesh filter. 5. Catchment Trays Readily available on request these items can also be made in sections dependent on the size of unit being supplied. 6. Divider Maintenance Dividers can be installed within the tank(s) to enable maintenance work without a complete shut down period. 7. Covers Tanks can be supplied with loose fitting covers. In circumstances where Byelaw *0 requirements are specified, the gasketed cover would be fitted with the appropriate screened vent. Google Decca Tanks