Product Description

***0 UV Seal Coat 一、UV curing theory Under the action of ultraviolet light and Infrared light, photosencitizer decomposition to produce free radical, the chemical reaction will occur among the following substance, free radical , UV curing resin, active thinner’s double linkage, the free radical will polymerizing, to make the coating solidify. 二、Component Photosensitive resin, active solvent, filler, Auxiliaries and so on 三、Usage Substrate treatment*-pad stain*-paint base coat (1 UV lamp ; *0w/cm)—paint finishing coat (1UV lamp *0w/cm) strap driving velocity *0 m/minute—Inspection-packing 四、Technique data 1. Appearance: semi-transparent viscous liquid. 2. Solid content: ≥*0% 3. Inhibitive substance : **0±*0PPMMonomer content: ≤*0% 4. Moisture content ≤0.3% 5. Monomer content: ≤*0% 五、Performance and Application 1. It is a high efficiency, energy-efficient, environmental-friendly and high performance coatings. 2. Single package, easy to application and dry quickly. 3. It can give the plastic like thermal paper, so it will have the same protective coat as lacquer. 4. It’s one of the paints that can achieve to **0%solidifying, while it’s seldom to get. They can impart products excellent richness and smoothness. 5. They can impart organic coating the best wearing resistance and chemical anticorrosion and good scrub resistance. 6. Can offer the superior quality performance by minimum energy consumption and high efficiency 7. Can be operated in different surroundings and easy to form the auto-production line, greatly shorten the construction period , thereby shorten the construction cycle, thereby enhancing the construction efficiency。Furniture, automobiles, commodity and industrial anti-corrosion and other fields are playing an increasingly important role. 六、Notes for Application The paint should be stored in a cool and dry place, far away from open flame. the wavelength of ultraviolet should between ******5 nm while drying. Driving Velocity should keep *0 meter/min While open the drum of coating, it should be finished timely, the unfinished coating should be stored in airtight cool and dry place. Avoid the light source ***8 UV transparent primer 一、Photo-curing Theory Under the action of ultraviolet light and Infrared light, photosensitize decomposition to produce free radical, the chemical reaction will occur among the following substance, free radical , UV curing resin, active thinner’s double linkage, the free radical will polymerizing, to make the coating solidify. 二、Component Photosensitive resin, active solvent, filler, A 三、Use methods Substrate treatment*-pad stain*-paint base coat (1 UV lamp ; *0w/cm)—paint finishing coat (1 UV lamp *0w/cm) strap driving velocity 1 m/min—Inspection-packing 四、Technique data 1. Appearance: creamy and flowing liquid. 2. Solid content: ≥*8% 3. Inhibitive substance : **0±*0PPM 4. Moisture content ≤0.3% 5. Monomer content: ≤*0% 五、Performance and Application 1. It is a high efficiency, energy-efficient, environmental-friendly and high performance coatings。 2. Single package and easy to construct, also drying quickly。 3. It can impart longsuffering protective film to plastic cement products and heat-variable paper products. This is one of the **0%solidefying coatings that is seldom to seen now。 4. They can impart products excellent richness and smoothness. They can impart organic coating the best wearing resistance and chemical anticorrosion and good scrub resistance. While offering the superior quality performance energy consumption and high efficiency by minutes。 5. It can be operated in different surroundings, the auto-production line is easy to form, greatly shorten the construction period, to enhance the efficiency of construction .Such pain already place a more and more important part in many industries, such as furniture, automobile, daily necessities and industrial protective areas. 六、Notes for Application 1. It should be stored in a cool and dry place, far away from open flame. 2. The wavelength of ultraviolet should between ******5 nm while drying. 3. Driving Velocity should keep *0 meter/min While open the drum of coating, 4. It should be finished timely; the unfinished coating should be stored in airtight cool and dry place. Avoid light source directly. ***8 UV topcoat 一、Photo-curing Theory Under the action of ultraviolet light and Infrared light, photosencitizer decomposition to produce free radical, the chemical reaction will occur among the following substance, free radical , UV curing resin, active thinner’s double linkage, the free radical will polymerizing, to make the coating solidify. 二、Component Photosensitive resin, active solvent, filler, Auxiliaries and so on 三、Use methods Substrate treatment*-pad stain*-paint base coat (1 UV lamp ; *0w/cm)—paint finishing coat (1 UV lamp *0w/cm) strap driving velocity 1m /min—Inspection-packing 四、Technique data 1. Appearance: creamy and flowing liquid. 2. Solid content: ≥*8% 3. Inhibitive substance : **0±*0PPM 4. Moisture content ≤0.3% 5. Monomer content: ≤*0% 6. Luster ≥*8° 五、Performance and Application 1. It is a high efficiency, energy-efficient, environmental-friendly and high performance coatings. 2. Single package and easy to construct, also drying quickly. It can impart longsuffering protective film to plastic cement products and heat-variable paper products. 3. This is one of the **0%solide coatings that is seldom to seen now, They can impart products excellent richness and smoothness. 4. They can impart organic coating the best wearing resistance and chemical anticorrosion and good scrub resistance. While offering the superior quality performance energy consumption and high efficiency by minutes, 5. It can be operated in different surroundings, the auto-production line is easy to form, greatly shorten the construction period, to enhance the efficiency of construction .Such pain already place a more and more important part in many industries, such as furniture, automobile, daily necessities, and industrial protective ***** 六、Notes for Application The paint should be stored in a cool and dry place, far away from open flame. The wavelength of ultraviolet should between ******5 nm while drying. Driving Velocity should keep *0 meter/min While open the drum of coating, it should be finished timely, the unfinished coating should be stored in airtight cool and dry place. Avoid light source directly.