Product Description

M-PLA**0XX******1 Series
(PLA, filament material; **0, filament diameter3.*0mm; XX, color in short;**0, recommended printing temperature at deg C)
 
e.g.
M-PLA**0MW******1 (Milky White)
Application Facility              Kinsuntek KPM**5 V1 and other verified printers (FDM)
Material                          dissolvable PLA plastic (verified by Kinsuntek)
Diameter                          3.0mm，standard tolerance is no more than +/*0.*5mm
Net wet                           1kg/roll
Packaging Type                    roll
Printing Temperature              *10 - **0 ℃
RecommendedPrinting Temperature  *20 ℃
RecommendedPrinting Speed        *0 – *0mm/s
Color                            White, Black, Gray, etc(base on stock color)

KinSunTek PLA Filament is the best and most consistent filament for KinSunTek Desktop 3D Printers. 

KinSunTek PLA Filament is a bioplastic derived from corn and other plants.
It's guaranted not to have any heavy metals, phthalates or BPA.

Comprehensively quality tested at both ***-micron and ***-micron layer resolutions on the KinSunTek KPM**5 Series to verify that the filament will perform every feature that KinSunTek Desktop Software offer.
If you're new to 3D printing, KinSunTek PLA Filament is a good material to start with because it's easy to use and performs well on most prints.

KinSunTek PLA Filament adheres well to acrylic and to KinSunTek other printing platform..
Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.

Store KinSunTek PLA Filament in a cool, dry place as it can absorb moisture from the air and lon-term exposure to humidity can compromise filament quality and performances.

Be sure your build plate is lever, clean and oil-free before printing.