Product Description

Outline:
Punch lubricant particles,it does not contain sub-containing graphite and graphite.Product particle size is divided into:1.0~1.5mm,1.5~2.0mm,2.0~3.0mm,the injection sleeve and it Plunger top melting and rapid expansion through its excellent capillary effect in the injection sleeve to form a lubricating film with excellent performance.It is easy to use without a traditional oil-based or water-based products used in dispensing pump-spray system.

Advantage:
1, no general pollution generated by oil lubricant;
2, reduce the incidence of casting porosity;
3, to extend the plunger tube life, reduce adverse effects due to friction;
4, with a punch to the die casting plant life, usually with pure oil lubrication than tripled;
5, increase injection speed;
6, casting particles completely consumed, no oil pollution;
7, no oil marks casting surface, the surface clean and bright;
8, pouring mouth, flow, soup cake recycling used, no grease, smoke, air pollution;
9, do not waste water, without water cooling system and cleaning the injection head;
*0, the amount of a province, can achieve cost savings;
*1, to improve process safety;
*2, to maintain plant, ceilings, floors clean, green environmental protection in line with modern requirements.

White particles:
Structure/shape:without graphite,beaded ball
*0℃,density:0.**0.7cm3
Color:White
Melting point:******0℃
Scope:*****0mm in diameter between the injection sleeve
Black particles:
Structure/shape:without graphite,beaded ball
*0℃,density:0.**0.7 cm3
Color:White
Melting point:**1℃
Scope:*****0mm in diameter between the injection sleeve.
Instructions for use:
Transmitter will be joined by particle particles pouring Room
Use of the punch diameter for different
*0mm0.**0.5g
*0mm0.**0.8g
**0mm1.**1.3g
**0mm1.**2.5g
>**0mm2.**4.0g
Used to determine the amount depends on the casting weight to be triedby the experience.