PLUSCOAT

75.Yil Mah., Oto Esnaflar San.Sit., 221.Cad., A Blok, No: 5,,Eskisehir,Odunpazari,Turkey

Free Member

PLUSCOAT PLUSGUARD A01 EXTERIOR MATT PAINT

Turkey

-

45 ~ 60 / Unit ( Negotiable ) Get Latest Price

Turkey

45 per Unit

100 Unit

15L plastic drums, different sizes of crate is available for safe transportation

2-3 weeks depending on season condition

1000 Unit per Week

T/T, L/C, Western Union

Exterior coatings

Product Specification

PLUSGUARD EXTERIOR MATT PAINT

Acrylic

Building Coating

roller

BLEND

PLUSCOAT

-

-

-

ANY COLOR IS AVAILABLE

white, pastel, mid or deep base is available

Product Description

PLUSGUARD A01
EXTERIOR MATT PAINT
PLUSGUARD A01 is a high quality, resistant to extreme climate condition, waterproofing, exterior and interior use, matt acrylic paint. It can be applied on concrete, plaster, brick, masonry surfaces, plywood, anti-rust primed steel, etc.  It has anti-fungal properties, which gives to material a mould resistance. PLUSGUARD A01 gives outstanding economy with the advantage of a low material consumption rate, high hiding power and excellent adhesion.
PROPERTIES: PLUSGUARD A01 provide excellent weather and pollution-resistant properties, with good hiding power, perfect water vapour permeability and low consumption, which makes material highly economical in long term of exploitation. PLUSGUARD A01 contains high quality polymer resins to ensure excellent water and weather resistance. Formulate without using of solvent and any other hazardous additives, which makes material environmentally friendly.
AREA OF USE: PLUSGUARD A01 can be applied on most interior and exterior finishes such a cement base renders, dry wall panels, timber, plywood, galvanised and anti-rust applied steel etc. It is creating perfect finish for all functional and design requirements, makes luxury walls for commercial and residential use, particularly in high traffic areas.
PREPARATION OF SURFACE: All dust, dirt and foreign matter should be scraped and brushed away.  Also the surfaces should be free from salts, oil, grease and ridges. Before applying to old surfaces, ensure the substrate is firm.  First wash down the old surface with a sugar-soap solution, rinse and allow drying before repairing or applying the primer. Protect all adjacent surfaces not to be covered.  All cracks, chips, voids and damages should be repaired with repair mortars or plasters of PLUSCOAT. Prime all untreated surfaces with a suitable primer.
APPLICATION: Stir well before use. The application surfaces and area should be over +5°C. PLUSGUARD A01, diluted with clean water in 10-20%, applying in 2-3 coats by the roller, brush or spray.  Leave 2 to 4 hours between coats. Reserve enough material for one uniform surface and mix into one can to avoid possible colour differences. Clean tools and equipment with water after use.
CONSUMPTION: 0.20-0.25 L/m2 in 2 coats of application.
HEALTH & SAFETY: Keep out of reach of children. Avoid contact with skin and eyes.  In case of contact with skin, wash down with clean water.  In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.  Use in a well ventilated area. 
PACKAGING & STORAGE: PLUSGUARD A01 is supplied in 15 and 4 L plastic pails. Store material in a clean dry area, protected from direct sunlight and extreme heat and cold. Unopened containers can be stored for 12 months.  Use the oldest material first.
RECYCLING: Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. For packaging recycle type look on a bottom of pails.
TECHNICAL DATA
Product              Exterior matt paint
Binder               Acrylic polymers
Colour                Colour chart of PLUSCOAT
Diluting              10-20% with water
Specific gravity 1.5
Consumption    0.20-0.25 L/m2 in 2 coats
Application        Roller, brush, airless spray
Drying time       2-4 hours
Packaging           15 and 4 L plastic pails
Storage               12 months in the original unopened tare

Contact Us

PLUSCOAT

Contact Person

Mr. MAHMUD

Company

PLUSCOAT

Address

75.Yil Mah., Oto Esnaflar San.Sit., 221.Cad., A Blok, No: 5,, Eskisehir, Odunpazari, Turkey,26250

To

Subject

Message

I want to know

More Products From Other Suppliers

Book call on your favorite time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services