Product Description

PAM emulsion Product Appearance： Opalescent white emulsion Product Characteristics： Low viscosity, good solubility, low energy consumption, excellent shear resistance, no toxicity, no powder pollution, no damage to body health, excellent fluidity, easy to handle, especially suitable for automatic addition and production. 1. Advantages of (W/W) PAM emulsion over solid products: better solubility, higher efficiency, no powder pollution and realization of automatic addition; 2. Advantages of (W/W) PAM emulsion over other colloid products: better solubility, higher effective components, low viscosity, excellent fluidity and realization of automatic addition; 3. Advantages of (W/W) PAM emulsion over (W/O) PAM emulsion: no oil components and surfactants, no secondary pollution to water, lower cost. Solid PAM Product Appearance White powder or granula Product Characteristics High flocculent ability and good thickening ability. The product can relatively easily dissolve in water to form viscous solution. Molecular weight of product can be adjusted according to customer’s request. Application Field Anionic PAM is mainly used in minerals selection, metallurgy, coal washing, food, steel, spinning and papermaking industry which involves separation of solid-liquid and waste water treatment. Anionic PAM can also be used for oil well and oil extraction in oil industry, and retention aids and intensifier in papermaking industry. Cationic PAM is mainly used as flocculants and dewatering reagents for industry waste water and sewage; retention aids and intensifier in paper making industry; waste water treatment in pharmaceutical, leather making, printing and dyeing industry waste water treatment, and organizer in textile industry. Nonionic PAM is mainly used as flocculants with high selectivity in oil well fluid, and acidic waste water treatment. Amphoteric PAM is mainly used high difficult waste water treatment or sludge dewatering reagents in oil refining and chemical industry or papermaking industry. Feeding and Dosing According to the properties of product, the followings should be noticed during the process of preparation and usage. 1, The concentration should be too high, normally between 0.*5%*0.5%. 2. During the process of dissolving the product, stir slowly while adding the product slowly to half-water-filled tank, this can help the product disperse rapidly. Addition of product without stirring the mixture, or addition of water after product into the tank is forbidden to avoid the formation of big chunk, which is difficult to dissolve. 3. Water used to prepare solution should be neutral. Normally, tap water is fine in this process, no specific requirement. 4. The speed of stirring or agitation should be in a proper range. Relativ